Table of Contents
Advertisement
Chapter I. Unified Boot Option ROM
6.2.
uEFI FCoE Boot
•
Only uEFI v2.3.1, v2.4 and v2.5 supported.
Important
•
Any other uEFI version is NOT SUPPORTED and may render your
system unusable.
6.2.1. HII
This section describes the method to configure and use Chelsio uEFI FCoE interfaces using HII.
i.
Reboot the system and go into BIOS setup.
ii.
Select Chelsio T5/T6 and press [Enter]
Please ensure that Chelsio uEFI driver is loaded correctly as mentioned in
Note
Loading uEFI driver
iii. Select the Chelsio adapter to be configured and press [Enter].
Chelsio Unified Boot
section.
41
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Terminator Series and is the answer not in the manual?
Questions and answers