Subscribe to Our Youtube Channel
Summary of Contents for Vanco Evolution EVRC5002
- Page 1 HDMI® E D I D Sync Recorder Vanco Part Number EVRC5002 HDMI® EDID Sync Recorder www.vanco1.com • 800.626.6445...
- Page 2 DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters.
- Page 3 FEATURES INTRODUCTION The Evolution by Vanco EVRC5002 HDMI EDID Recorder is an EDID Reader/Writer/Re- timer that has the ability to emulate EDID (Extended Display Identification Data) information. For use in applications where EDID issues are occurring. Features the ability to set EDID from the main unit or from a connected computer using the included software.
-
Page 4: Specifications
SPECIFICATIONS TECHNICAL SPECS DVI/HDMI Compliance ..........DVI 1.1/HDMI Deep Color and 3D HDCP Compliance ............Yes Video Bandwidth ............Single-link 225MHz [6.75Gbps] Video Support ............Up to WUXGA [1920x1200@60Hz] & UXGA [1600x1200@60Hz] Input ................ 1x HDMI Output ..............1x HDMI HDMI connector ............ -
Page 5: Panel Descriptions
PANEL DESCRIPTIONS 1. Mini-USB port : Connect to a PC for software operation 2. HDMI IN : Connects to an HDMI source with an HDMI male-male cable 3. EDID MODE : Setting desired EDID mode 0 - EDID Full-HD(1080p@60) - 24bit 2D video & 7.1ch audio 1 - EDID Full-HD(1080p@60) - 24bit 2D video &... -
Page 6: Connect And Operate
CONNECT AND OPERATE 1. Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI input on the unit. 2. Connect a display such as an HDTV or HD Projector to the HDMI output on the unit. 3. -
Page 7: Software Operation
SOFTWARE OPERATION BEFORE RUNNING THE SOFTWARE, SET THE ROTARY SWITCH TO 7 1. Getting Started 2. Create EDID • Select EDID mode (HDMI or DVI) HDMI MODE “Save EDID on Computer” to save the generated EDID as a file “Save EDID to EVRC5002” to copy the generated EDID to EVRC5002 800.626.6445... - Page 8 DVI MODE “Save EDID on Computer” to save the generated EDID as a file “Save EDID to EVRC5002” to copy the generated EDID to EVRC5002 3. View Display’s EDID Reading the EDID from the display for analysis www.vanco1.com...
- Page 9 4. View EVRC5002 EDID Reading the EDID from EVRC5002 for analysis 5. Firmware Update 1. Click “Load BIN” to load firmware file. 2. Click “Burn” and reboot EVRC5002. 3. Firmware is updated after the progress bar is completed to 100% 800.626.6445...
-
Page 10: Troubleshooting
Vanco’s opinion, prove defective within this warranty period, Vanco, at its option, will repair or replace this product without charge. Any defective parts replaced become the property of Vanco. This warranty does not apply to those products which have been damaged due to accident, unauthorized alterations, improper repair, modifications, inadequate maintenance and care, or use in any manner for which the product was not originally intended. -
Page 11: Technical Support
TECHNICAL SUPPORT In case of problems, please contact Vanco Technical Support by dialing 1-800-626-6445. You can also email technical support issues to info@vanco1.com When calling, please have the Model Number, Serial Number (affixed to the bottom of the unit) and Invoice available for reference during the call. - Page 12 ® Vanco International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.com...
Need help?
Do you have a question about the Evolution EVRC5002 and is the answer not in the manual?
Questions and answers