Advertisement
Advertisement
Table of Contents
Summary of Contents for Flash butrym STROBO 1000W
- Page 1 1000W STROBE LIGHT USING MANUAL www.flash-butrym.pl Strona 1...
- Page 2 Thank you for having chosen our company’s products. For your own safety, please read this user manual carefully before installing the device. SAFETY INTRODUCTION If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately. The arising condensation could damage the device. Leave the device switched off until it has reached room temperature.
- Page 3 INSTALLATION INSTRUCTIONS a) Installing or replacing the lamps Before replacing the lamps let the lamps cool down, because during operation, the lamps can reach temperatures of up to 700℃. Wait at least 10 minutes after use before opening the housing. During the installation of the lamp do not touch the glass bulb bare handed.
- Page 4 Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed. We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or solvents.
Need help?
Do you have a question about the STROBO 1000W and is the answer not in the manual?
Questions and answers