Advertisement
XENA SECURITY XX SERIES BLE DISC-LOCK ALARM QUICK START GUIDE
Questions or comments about your XENA product? Email us at info@xenasecurity.com
A. Opening lid and removing module
BATTERY LIFE
Batteries last 6 to 8 months with normal use. Frequent triggering or extreme temperatures can shorten battery life.
KEYS
Each XX Series lock comes with a key-ring, three keys and a flat key-tool etched with a unique code number (ie, HAB123456) and
serial number (ie, 1234567890). Write down your key code and store safely.
REGISTERING YOUR XENA LOCK
On the key-shaped metal tool (fig. D), you'll find your two unique ID numbers:
Please input both when registering at www.xenasecurity.com/registration.
"WAKING UP" YOUR ALARM
• Avoid draining battery when not in use. Your XENA disc-lock alarm has a dormant power mode. Usually metal-on-
metal contact from locking the lock onto your brake-disc will allow the unit to arm normally.
• IF NOT, it may be necessary to wake the arming sensor by firmly locking and unlocking the barrel once or twice.
CARING FOR YOR LOCK
• Use a dry cloth to keep the LED reflector plate inside the disc-slot clean and free of dirt, dust and grease. An obstructed reflector
plate can affect performance and may cause the lock to arm when not on the brake disc.
• We recommend applying a lock lubricant to the lock barrel every six months.
TRANSPORTING YOUR LOCK
• Ideally you should stow your XENA underneath the seat of your bike.
• CAUTION: Do not carry your XENA in, or attach it to, your clothing. This may contribute to injury in the event of an accident.
TROUBLESHOOTING
• Alarm not arming: Check battery, ensure reflector is obstructed by disc. Confirm sensors are active (see below).
• Constant clicking or low beeping sound: replace batteries.
• Alarm too sensitive: Use app to raise sensitivity setting. Place at 6 o'clock on disc.
• Alarm not sensitive enough: Use app to reduce sensitivity setting. Place at 12 o'clock on disc.
• Alarm won't disarm: Clean sensor and reflector.
IF ALARM IS DAMAGED
• The alarm module is removable and replaceable. Replacement modules are available from authorised XENA dealers or by emailing
us directly at info@xenasecurity.com. NOTE: the lock remains effective with or without the alarm system.
Disclaimer
Our products are sold as security enhancements, and are not a substitute for the end-user's duties of normal care
and attention. As such, XENA Security accepts no responsibility or liability for any direct or consequential loss,
damage or injury arising or resulting from the use or misuse of our products howsoever arising, save that we will
always replace any product found to be defective within the warranty period.
www.xenasecurity.com
B. Replacing lid
Advertisement
