Page 2
Sep 28, 2010 First version IMPORTANT NOTICES Information in this document is subject to change without notice. Latitude Technologies reserves the right to change or improve their products and to make changes in the content of this material without obligation to notify any person or organization of such changes or improvements.
Page 3
Latitude Technologies Corporation warrants products it manufactures against defects in materials and workmanship for a period of one year from the date of factory sale. During the warranty period, Latitude Technologies Corporation will, at its option, either repair or replace products that prove to be defective.
Iridium exterior antenna, it provides for global communications from enclosed surroundings in the harshest of environments. 1.2. Equipment Description The LT-DPLS401 provides satellite phone control and dialpad functions in a small and light package. Figure 1 - LT-DPLS401 handset shown with hangup cup holder 1.3. Equipment Limitations The installer should refer to the installation instructions for the S200 system.
Eight-wire unshielded coil cable with MS connector Connector: MS3116F, 6 pin circular plug 3.3. Part Numbers The following Part Numbers are applicable to this Installation Manual P/N LT-DPLS401, Short cord length-200cm P/N LT-DPLL401, Long cord length-450 cm Page 6 of 13...
740-0158A-A, LT-DPLS401 User Instruction 4. User Instructions 4.1. DPL Handset Overview Figure 2 – Basic display and function keys of the DPL handset Page 7 of 13...
740-0158A-A, LT-DPLS401 User Instruction 5. Startup Procedures 5.1. Power on When DC power is applied to the S200 satcom, both the S200 and the DPL Handset are powered up automatically. There is no need to press the power on/off key to do this.
740-0158A-A, LT-DPLS401 User Instruction 6. Placing a Call To place a call, the DPL handset and the S200 satcom must be powered on, have a network activated SIM card and be in contact with the Iridium satellite network. A phone number up to a maximum of 20 digits can be entered. The digits are displayed in a single row with the character size automatically adjusted to fit the LCD screen.
740-0158A-A, LT-DPLS401 User Instruction For example, to call Latitude Technologies (Canada) from the Satphone dial: 001 250 475 0203. To place a call from your Iridium phone to another Iridium phone dial (00 + Iridium Number). 6.3. Dial a Toll Free Test call To test voice operation call customer support 24-hours a day, 7-days a week from your satphone (toll free) at 6868.
740-0158A-A, LT-DPLS401 User Instruction 7. Receiving a Call To receive a call, the DPL handset and the S200 satcom must be powered on, have a network activated SIM card and be in contact with the Iridium satellite network. 7.1. Receiving a Call 7.2.
Additional DPL handset and Iridium calling Features Please contact Latitude Technologies for further detailed menu commands and user tips on how to get the most benefit from your satellite phone system. Page 13 of 13...
Need help?
Do you have a question about the LT-DPLS401 and is the answer not in the manual?
Questions and answers