First Use; Checking The Laminator And Product Contents; Setting Up The Laminator; Activating / Deactivating The Laminator - Easy@Home OL 250-Q125 User Manual

USA

First use

First use

Checking the laminator and product contents

NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointy object, you may quickly damage
the laminator.
− Be very careful when opening.
1. Take the laminator out of the packaging.
2. Check whether the laminator or the individual parts exhibit damage. If this
is the case, do not use the laminator. Contact the manufacturer at the ser-
vice address specified on the warranty card.
3. Check to make sure that the delivery is complete (see fig. A).

Setting up the laminator

1. Position the laminator so that there is enough space to insert a laminating
pouch 6 . Do not position the laminator directly in front of a wall or other
objects.
2. Connect the power plug to a properly installed socket with a protective con-
ductor (120 V = house connection).

Activating / deactivating the laminator

1. Move the ON/OFF switch
The ready indicator
laminator has reached the correct temperature for lamination.
The preheating time may vary depending on the ambient tem-
perature and air humidity.
2. Move the ON/OFF switch to "OFF" (
12
www.monolith-support.com
4 to "ON" (―) to switch the laminator on.
1 will turn from dark blue to red once the
) to switch the laminator off.
AAAAA
Laminator
AFTER SALES SUPPORT
1 877-386-8264
USA