Advertisement
DISPLAY WALL MOUNT JEWELRY ARMOIRE
Assembly Instructions
Assembly Instructions:
Figure 1
Wood may scratch easily, Be careful
when assembling. Do not scratch.
Unpack and lay parts on clean, padded
surface like carpet or blanket.
Clean the unit(A) well and open the door
panel, check if all the parts inside are
present.
Drill two holes on wall, the distance
between two holes as figure shown.
Insert two wall anchors(2) into the wall
first; Locking up the unit(A) into the wall
with wood screws(1).Should match
the hangers on back of the jewelry
mirror(A).
Last check if the unit(A) is attached on
the wall firmly.
It is recommended to mount at least
one screw into a wall stud.
Advertisement
