Related Manuals for Mediclinics GAJ002AC
Summary of Contents for Mediclinics GAJ002AC
- Page 1 Installation Automatic Faucet with soap dispenser Read ALL the instructions completely before installation Ref.: TBD / Rev. A 18/09/2019...
- Page 2 Specifications Trouble shooting Model No. GAJ002AC Symptom Cause Treatment Description Automatic faucet with soap dispenser The battery is exhausted Change the battery DC:6V(4AA alkaline batteries） Water supply cut off Check supply Power Suplly No water out AC：220V-240V；50/60Hz Dirt in the filter Clean the filter DC:≤0.18-0.33mW...
- Page 3 Debugging step for soap dispenser Part name 1、Fill the bottle full of liquid soap for the first time； 2、Press and hold the dispense button on the control box, release till the soap is dispensed. Soap nozzle Aerator 3、Start the system by passing your hand in the sensor range, soap will dispense automatically.
- Page 4 Installation Installation Warning :Before installing the new spout it is essential that you throughly flush through the pipework in order to remove any remaining swarf,solder etc. Failure to carry out this procedure could cause problems or damage to the workings of the spout. This product must not be modified in any way as this will invalidate the guarantee .
Need help?
Do you have a question about the GAJ002AC and is the answer not in the manual?
Questions and answers