Advertisement
Connection to vehicle
- Plug GAT Next dongle to OBDII port of your
vehicle. Usually this port is located under
the dash board at driver's side.
- Once dongle is plugged you should notice
a led light blinking in dongle.
- Open your iOS device WiFi connection
menu. Normally it is located: Settings
Wi-Fi
We are here to help! You can contact us at support@bimmerretrofit.com with any questions
GAT Next Coder Support Documentation
!
Advertisement
Table of Contents
Related Manuals for Bimmer Retrofit GAT Next
Summary of Contents for Bimmer Retrofit GAT Next
- Page 1 GAT Next Coder Support Documentation Connection to vehicle - Plug GAT Next dongle to OBDII port of your vehicle. Usually this port is located under the dash board at driver’s side. - Once dongle is plugged you should notice a led light blinking in dongle.
- Page 2 Configure IP: Manual mode Static IP: 10.10.65.2 Gateway: 255.255.255.0 This configuration is required one time only at initial connection with GAT Next dongle. We are here to help! You can contact us at support@bimmerretrofit.com with any questions...
- Page 3 GAT Next Coder Support Documentation Gateway - Once configuration is completed exit WiFi menu and start GAT Coder app - Select ‘Connection’ from Main Menu - In new menu press ‘Connect’ button in the bottom. If you want also to download from server vehicle’s options FA list turn ‘FA List’...
- Page 4 GAT Next Coder Support Documentation - Connection information will appear on display shortly after communication between iOS device and vehicle started. We are here to help! You can contact us at support@bimmerretrofit.com with any questions...
- Page 5 GAT Next Coder Support Documentation - After connection is established you should see a message advising about current status of connection - Blue line will appear on top of display showing that connection is established We are here to help! You can contact us at support@bimmerretrofit.com with any questions...
- Page 6 GAT Next Coder Support Documentation - If ‘FA List’ switch was enabled prior to connection, you may scroll down to see vehicle details. Please note that FA List function requires internet connection available in your iOS device. - To disconnect from vehicle return back to ‘Connection’...
- Page 7 GAT Next Coder Support Documentation - Blue line from top of display will disappear showing that connection is no longer established We are here to help! You can contact us at support@bimmerretrofit.com with any questions...
Need help?
Do you have a question about the GAT Next and is the answer not in the manual?
Questions and answers