Malibu Kayaks X-Factor Reinforcement Installation

B
B
1
Align the center block (A) with
the center of the hull.
4 4
A A
The center block (A) should be
positioned as shown in this
picture.
A
2
Place center block (A) below the
hatch opening.
5
Now, place the blocks (B)
underneath the seat. Mount the
blocks securely onto the inner
grooves.
www.malibukayaks.com
Malibu Kayaks LLC. all rights reserved.
Reinforcement Installation
support@malibukayaks.com
A. 3" x 2" x 8" (x1)
B. 3"x 2" x 4 ¾" (x2)
C. 3"x 2" x 4 ½" (x4)
3
Insert block (A) between the cut
edge and seat groove. Push the
block to lock into place.
6
4 6
B
B
Each block (B) should be
positioned as shown in this
picture.
1-877-952-9257
X-Factor
B
B
1