Contents Note! Use the controller only after first reading this operating manual and familiarising yourself with its content in full! In the event of any uncertainty regarding use of the controller, contact your heating engineer. Contents What can your new controller do? ......................2 1.1.
What can your new controller do? 1.1. Information regarding operation Note! The solar energy system is configured by your heating engineer during commissioning and operates in a fully automatic manner. Even during long periods of absence (e.g. holidays), do not switch the solar energy system off.
Guarantee and liability 4. Guarantee and liability All regulations regarding guarantee and liability are stipulated within the manufacturer’s general terms and conditions, and within the respective contractual relationship. Guarantee claims and liability claims are expressly excluded in the following cases: If damage has been caused by inappropriate usage of the controller.
How your controller is structured How your controller is structured 7.1. The display Your controller has a clearly laid-out display, which shows you information (e.g. present temperatures) regarding your solar energy system and helps you to adjust values. Once the start display appears, this means that the controller has been activated correctly and is in operation.
Basic menu navigation Basic menu navigation – You can easily reach any part of the menu with the aid of the four buttons Beginning in the start display (see section 7.1 The display), you can use the buttons to change to any submenu, so as to query or adjust various values.
Basic menu navigation 8.4. Leaving a submenu From anywhere in a submenu, you can return to the main menu without saving changes by pressing In addition, the start display is returned to automatically if 60 seconds pass without any button being pressed (exception: relay test submenu returns to main menu after 30 minutes).
Functions and settings You can also read the following measurements and results in the information display menu: Display Function Heating return temperature (temperature of the heating water before it is pumped back into the boiler to be heated). Note: only when heating support is activated! First temperature value for the temperature comparison function.
Maintenance 10. Maintenance The controller is maintenance-free. From time to time, you can clean it with a soft, clean and dry cloth. Note! Make sure that no moisture gets inside the controller! For cleaning, never use cleaning agents which contain solvents! 11.
Page 12
The descriptions, performance specifications and graphics in this manual are non-binding. Subject to technical alterations. This manual may not be duplicated, distributed, altered, passed on, translated into another language or used in any other way, without the express permis- sion of the manufacturer. The content of this manual has been carefully checked.
Need help?
Do you have a question about the LATHERM SOL BASIS and is the answer not in the manual?
Questions and answers