CONFIGURING THE KEGS5000 FOR STANDALONE OR SLAVE USE, CONTINUED
Configure
KEGS5000
for
1. Cycle power on the KEGS5000.
Standalone
or Slave
modes
2. Before the counter reaches zero. Press the 1 key.
3. Enter the password 1994
4. Use the arrows key under the LCD display to select
Slave Mode. Press Enter to run this mode. or
Note: this mode is for use with the KSX3208L, MXSYS04E or
5. Use the arrows key under the LCD display to select
Standalone Mode. Press Enter to run this mode.
Note: this mode is for use with the KD6 domes and Ultrak
MAX1000
multiplexes
Boot Manager
1.64
Booting In 5..4..3
Enter Password ----
<Run Bank>
Slave Mode
<Run Bank>
Standalone Mode
2 of 3