Advertisement
OptiXstar P812E
Quick Start
Ports and
buttons
POE1-
POE4/2.5
GPOE
Power
On/Off
Reset
Issue 02 (2020-01-03)
Description
Connect to a PC, IP STB, IP phone, camera or AP.
POE: Support 10Mbit/s or 100Mbit/s or 1000Mbit/s interface rate
adaptation.
2.5G POE: Support 1000Mbit/s or 2500Mbit/s interface rate
adaptation.
NOTE
● The POE1-POE4/2.5G POE ports comply with IEEE 802.3at and support
the PoE/PoE+.
● The ONU supports PoE total output power up to 60W, and each POE
port supports up to 30W.
● The output voltage of POE ports is 56V DC.
● When the 2.5G POE port causes a bit error rate greater than 1% under
strong interference conditions, the device will automatically trigger the
fast retrain function to ensure that the device recovers the signal in
about 30ms.
Connects to a power adapter.
Powers the ONU on or off.
Press the button for a short time to reset the device, or press the
button for a long time (longer than 10s) to restore the device to
the default settings and reset the device.
Copyright © Huawei Technologies Co., Ltd.
3 Connecting Cables
12
Hide quick links:
Advertisement
