Using the Display Screen and Menus with Web-based technology. Your HermitCrab will make a daily connection to the ET Water cloud service and retrieve an irrigation schedule for each of the watering stations in your landscape. These daily schedules reflect...
“communications report” on your Account Overview page to determine if the HermitCrab has already (host) controller so that you can correct any transformer, wiring or solenoid problems before you connected with the ET Water servers. If it has connected, it should continue to connect on a daily basis. install your HermitCrab.
Page 4
Step 11: Execute a Test Dial a dust mask. A Test Dial initiates a connection to the ET Water servers where all of your account information, landscape profiles, and watering schedules are stored. Turn the knob to highlight the Test Dial Step 4: Connect communications cable to your HermitCrab selection and press the knob to make the selection.
Serial Number: Your serial number is unique, and you should use it if you communicate with the ET Water Support Team. Test Dial: A Test Dial initiates a connection to the ET Water servers where all of your account information, landscape profiles, and watering schedules are stored. You may execute a Test Dial Status: This line tells you what your HermitCrab is doing.
Model / Host Family Guide Hunter® SRC, Pro-C, ICC Hunter® SRC and ACC* Here is a list of the brands and models that are compatible with your HermitCrab: Host family Controller Model PREPARING YOUR HUNTER CONTROLLER: 1. Set the controller to the “System Off” position. Rain Bird®...
Hunter® SRC, I-Core, X-Core Irritrol® Kwik Dial® Hunter® X-Core PREPARING YOUR HUNTER CONTROLLER: PREPARING YOUR IRRITROL RAIN DIAL CONTROLLER: 1. Set the controller to the “System Off” position. 1. Set the controller to the “OFF or STOP” position. 2. Power off the controller. 2.
Irritrol® MC Plus B, Irritrol® Rain Bird® LX Modular (6 Pin) PREPARING YOUR RAIN BIRD CONTROLLER: PREPARING YOUR MC PLUS B CONTROLLER: 1. Leave the knob in the “OFF” position. 1. Set the controller to the “Rain Off” position. 3. Power off the controller. 2.
Rain Bird® ESP Modular (6 Pin) Rain Bird® ESP-ME (5 Pin with fly PREPARING YOUR RAIN BIRD CONTROLLER: wire cable ) 1. Turn the selector knob to “OFF.” 2. Power off the controller. PREPARING YOUR RAIN BIRD CONTROLLER: ATTACHING THE HERMITCRAB COMMUNICATIONS 1.
Toro® TMC-212® Weathermatic® SmartLine + Proline Models PREPARING YOUR TMC-212 CONTROLLER: The TMC-212 has preset schedules tht need to be removed PREPARING YOUR WEATHERMATIC before you can connect it to the HermitCrab. CONTROLLER: 1. Turn the control dial to” WATERING DAYS” 1.
Check the Home Screen to see if there’s a watering suspension in place. You should ET Water Systems, Inc. (“ET Water”) warrants that any ET Water hardware product will be free from defects in also check your online account to see if any restrictions have been applied.
Page 12
Within ten (10) business days after the date of notification, ET Water will provide you with a Return Material Authorization (“RMA”) number and the location to which you must return the product. You are responsible for proper packaging of the product returned to ET Water, shipment to ET Water’s designated location, and...
Need help?
Do you have a question about the HermitCrab 2 and is the answer not in the manual?
Questions and answers