Table of Contents
Advertisement
TV Operation
Start operation: Watch TV programs
1 Select a desired program
●Use the direct Program No. selection buttons
Operation method see previous page "buttons on remote controller."
●Use the Program No. Up/Down Button "P+" "P-" buttons
Pressing "P+" will select a Program No. in the increasing number;
Pressing "P-" will select a Program No. in the decreasing number.
2 Adjust the volume by Volume "V+/V-" button.
3 If the color of a channel is not normal, it may be a wrong setting of color system, and
it can be adjusted as described below:
Directly pressing the SYSTEM button on the remote controller to select the correct
color system.
AUTO→PAL→PAL/M→PAL/N →N3.58 →N4.43 will appear in turn.
Note: If you are using the machine for the first time, please first make the automatic
searching and store the programs as described in "Adjustment" in the subsequent
page.
Start operation: Adjustment
When you turn on the TV set for the first time, please operate as follows.
1 Program presetting (automatic searching)
Press the "MENU" button continuously on the machine to enter "PRESET", so that the
following menu is displayed on the screen:
Use "P+/P-" button to select "AUTO-SEARCH" option, now the characters of this
option turn red, then press "V+/V-" button to place the machine in the automatic searching
PRESET
POSITION
MEMORY
FINE
SEARCH
AUTO —SEARCH
l l l l l l l l l l l l . . . . . . . . . .60
CH+/CH- :SELECT
VOL+/VOL- :ADJUST
７
2
NO
Advertisement
Table of Contents
