Download Print this page

Jesco BATT-LI Instruction Sheet

Lithium-ion recharable battery pack

Advertisement

Quick Links

BATT-LI
Lithium-ion Recharable Battery Pack
Please read and save these instructions. Read carefully before using product. Protect yourself and others by observing all safety information,
warnings and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please retain
instruction sheet for future reference.
WARNING: Please read before charging or using battery
You must read these safety instructions and warnings before using or charging your batteries.
• Lithium Polymer batteries are volatile. Failure to read and follow the instructions below may result in fire, personal injury and damage to
property if improperly charged or used.
• JESCO LIGHTING GROUP is not liable for failures to comply with these warnings and safety guidelines.
• JESCO LIGHTING GROUP is only responsible for the products we sell. We are not responsible for any damages and consequences by using
our products improperly.
• By purchasing this battery, the buyer assumes all risks associated with lithium batteries. If you do not agree with these
conditions, return the battery immediately before use.
GENERAL GUIDELINES AND WARNINGS
1) Use provided charger only- Failure to do so may cause a fire, which may result in personal injury and property damage.
2) Never leave charging batteries unattended. When charging Li-ion batteries you should always remain in constant observation to
monitor the charging process and react to potential problems that may occur.
3) If at any time you witness a battery starting to balloon or swell up, discontinue charging process immediately. Disconnect
the battery and observe it in a safe place for approximately 15 minutes. Continuing to charge a battery that has begun to swell
will result in a fire. Likewise, never use a battery if you find it swollen or ballooned upon purchase.
4) Since delayed chemical reaction can occur, it is best to observe the battery as a safety precaution. Battery observation should occur
in a safe area outside of any building or vehicle and away from any combustible material.
5) Shorts in wire leads can cause fire! If you accidentally short the wires, the battery must be placed in a safe area for observation for
approximately 15 minutes. Additionally, if a short occurs and contact is made with metal (such as rings on your hand), severe injuries
may occur due to the conductibility of electric current.
6) If you accidentally cause the battery to short, place it in a safe open space and observe the battery for approximately 15 minutes. A
battery may swell or even possibly catch fire after a short time.
7) Never store or charge a battery pack inside your car in extreme temperatures, since extreme temperature could cause fire.
BEFORE YOU CHARGE
1) Make a visual inspection of the pack. Look for any damaged leads & connectors, or other irregularities. Do not use if you find any of the
above issues with your pack.
2) If any damage to the pack or leads is found, do not attempt to charge the pack; contact JESCO LIGHTING GROUP as soon as possible.
CHARGING PROCESS
1) Never leave charging batteries unattended.
2) Charge in an isolated area, away from other flammable materials on a concrete surface outside of buildings.
3) Let the battery cool down to ambient temperature before charging.
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
www.jescolighting.com
support@jescolighting.com
Tech Support: 855.592.0029
Instruction sheet subject to change without prior notice.
15 Harbor Park Drive
Port Washington, NY 11050
Main Line: 800.527.7796
Fax Line: 855.265.5768
219 South 6th Ave
City of Industry, CA 91746
Main Line: 855.654.0110
Fax Line: 626.333.2955
JW 06/20/2017
Page 1 of 3

Advertisement

loading

Summary of Contents for Jesco BATT-LI

  • Page 1 1) Make a visual inspection of the pack. Look for any damaged leads & connectors, or other irregularities. Do not use if you find any of the above issues with your pack. 2) If any damage to the pack or leads is found, do not attempt to charge the pack; contact JESCO LIGHTING GROUP as soon as possible. CHARGING PROCESS 1) Never leave charging batteries unattended.
  • Page 2 Integral in 100WH and 150WH models 12V OUTPUT PORT Use provide I/O cable or voltage regulator with I/O cable only I/O - Input and Output 12V I/O CABLE Included with BATT-LI-12V www.jescolighting.com 15 Harbor Park Drive 219 South 6th Ave 24V VOLTAGE REGULA support@jescolighting.com...
  • Page 3 I/O cable only I/O - Input and Output INCLUDED COMPONENTS (Varies by Battery Pack Model) 12V I/O CABLE Included with BATT-LI-12V-(100/150/266)WH 24V VOLTAGE REGULATOR WITH I/O CABLE Included with BATT-LI-24V-(100/150/266)WH 350mA VOLTAGE REGULATOR WITH I/O CABLE Included with BATT-LI-350mA-(100/150/266)WH...