Table of Contents
Advertisement
1.
READ and UNDERSTAND owner's manual.
2.
BE SURE that the "forward/reverse" lever is locked in neutral position before
starting engine.
3.
NEVER leave machine running while unattended.
4.
NEVER reach under or into machine while it is running.
5.
BE SURE that screed is in full "UP" position when machine is in transport.
6.
UNDER NO CIRCUMSTANCES ever allow any part of your body or anyone
else's body to come in contact with moving drive parts such as, but not
limited to, chains, sprockets, couplings, and cylinders.
7.
ALWAYS remove spark plug wire, make sure engine switch is off, throttle is
in "STOP" position, and shut gas off when working on or checking this
machine.
8.
DO NOT remove caution decals.
9.
Safety decals should be replaced immediately after repainting or when they
become illegible. **SEE NOTE BELOW**
SAFETY IS A PRIME CONCERN AT SALSCO AND THE SAFETY DECALS
ON YOUR MACHINE ARE A HIGHLY VISIBLE AND CONSTANT REMINDER TO
ALL OPERATORS. REPLACEMENT SAFETY DECALS MAY BE OBTAINED
FROM YOUR LOCAL DEALER OR BY CALLING TOLL FREE 1-800-872-5726.
NEVER OPERATE THIS MACHINE WITHOUT GUARDS IN PLACE.
O:\Manuals\MINI PAVER\05004 Mini Paver Manual P.W. 10.30.2017.doc
"CAUTIONS"
BEFORE YOU START THIS MACHINE:
**NOTE**
- 6 -
Advertisement
Table of Contents
