Table of Contents
Advertisement
Quick Links
TS PERFORMANCE
WE ARE DIESEL
Torque Converter Lock-Up
Manual
Thank you for buying the Torque Converter. Here you will learn how to install this
Torque Converter into your truck, and we guarantee that you will be satisfied with
our product. Before you get started check to make sure that you have everything
below in the contents that came in the box
Advertisement
Table of Contents
Summary of Contents for TS Performance Torque Converter Lock-Up
- Page 1 TS PERFORMANCE WE ARE DIESEL Torque Converter Lock-Up Manual Thank you for buying the Torque Converter. Here you will learn how to install this Torque Converter into your truck, and we guarantee that you will be satisfied with our product. Before you get started check to make sure that you have everything...
- Page 2 Continued Wiring Instructions There are 7 Wires to be Connected 1. Red: Power supply for the Loc-Up box. Connect to fused 12V +“ignition on” power source. 2. Black: Must connect eyelet to good clean ground. 3. Brown wire connects to the transmission side of the torque converter clutch (TCC) wire. 4.
- Page 3 Continued Vehicle Speed Sensor Hook-Up • On the tail shaft of transfer case (4x4) or transmission (2 wheel drive), locate the purple wire w/ white tracer and tap connect Yellow wire. Do not cut this wire only tap into the wire. Lock-Up Controller Screen Reads Description and Action to Take.
- Page 4 Do not use this product until you have carefully read the following agreement. This agreement sets forth the terms and conditions for the use of the TS Performance product. The installation of this product indicates that the buyer has read and fully understands this agreement and accepts its terms and conditions.
Need help?
Do you have a question about the Torque Converter Lock-Up and is the answer not in the manual?
Questions and answers