Before Setting The Controls; Setting The Controls - Whirlpool RF362BBD Use And Care Manual

Before setting the controls
l Make sure clock is set to correct
time of day. (See "Setting the
clock" on page 13.)
@Move Lock Lever all the way to
the right -the Clean position.
Setting the controls
2. Set cleaning time (optional).
If you want a Self-Cleaning cycle longer
or shorter than 3% hours, use the Hour
and Minute pads to set the desired
cleaning time. Press the "up" (A) or
"down" (r) pad(s) until a time between
2%-4X hours shows on the display.
l
Use 2% hours for light soil.
l USe
WA1/2 hours for moderate to
heavy soil.
PRESS
cleaning time)
3.
Start oven.
PRESS YOU SEE
NOTE: The display will show "door" and
a tone will sound once every 5 seconds
if the door is not latched (Lock Lever set
at the clean position).
24