HAPRO PROLINE Owner's Manual page 10

Operation without the use of an external timer or coinbox:
Other control functions:
10
By pressing the "start" button once, the tanning time can be shortened.
The maximum tanning time will be indicated by the flashing numbers on the display.
The tanning time can be decreased or increased by using the "body cooling off and on" buttons.
By pressing the "start" button, the machine starts operating.
If during tanning the "stop" button is pressed once, the machine's operation will be paused. The lights
and ventilation will go off. The tanning time continues to run down. The tanning session can be
restarted at any time by pressing the "start" button.
If the "stop" button is pressed a second time, the machine will turn into the standby mode. The tanning
session has now finished.
By pressing the "body cooling on" button, the body cooling can be turned on.
By pressing the "body cooling off" button, the body cooling can be turned off.