Do you have a question about the 043-1320-0 and is the answer not in the manual?
Questions and answers
Patrick
February 6, 2025
After I followed sets 1 to 5, I pressed the start button. The machine beeped 3 times and didn’t brew the coffee. Machine is a few years old so maybe we need a new coffee maker??
2 comments:
Mr. Anderson
February 10, 2025
The Master Chef coffee maker model 043-1320-0 beeps three times and does not brew coffee if the top cover is not closed properly. This happens because the funnel is not assembled correctly, preventing the cover from closing. Ensure the funnel is positioned correctly and the top cover is fully closed before starting the brewing process.
This answer is automatically generated
Susie Champagne
February 16, 2025
@Mr. Anderson. I have the same problem. My coffeemaker is a few years old also and my lid is closed properly. Beeps 3 times and does not brew. The burner also remains cold.
Gerald
February 7, 2025
Is the clock suppose to stay bright so you can at least see the time mine will not stay bright
1 comments:
Mr. Anderson
February 11, 2025
The manual does not specify whether the clock display stays bright to show the time continuously.
This answer is automatically generated
Marjory
July 8, 2025
What is the point of the clock if you have to be 2 inches away to see the time? Why does it not stay lit like other brands?
Frank Phelan
March 22, 2025
In throwing out the used grains, I dislodged the spring valve. How do I get the spring valve back in position?
Page 1
COFFEE MAKER Model no. 043-1320-0 INSTRUCTION MANUAL Read this booklet thoroughly before using the product, and save it for future reference. V810-C2181301_CM1055TA-UL_英文版说明书.indd 1 2018/4/26 11:38:19...
Page 2
Model no. 043-1320-0 | Contact us: 1-855-803-9313 fire, electric shock or injury to persons. Important Safeguards Know Your Coffee Maker 8. Do not use outdoors. Control Panel 9. Place appliance on flat surface or table. Do not let cord hang over edge of table or counter, Using Your Coffee Maker or touch hot surface.
Page 3
Model no. 043-1320-0 | Contact us: 1-855-803-9313 SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY Notes on the cord plug Nylon filter This appliance has a polarized plug. To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug.
Page 4
Model no. 043-1320-0 | Contact us: 1-855-803-9313 turns on. Then press ON/OFF button once, and the appliance will start to brew strong coffee. Both If you do not want the coffee maker to start operation immediately, for the STRENGTH and ON/OFF indicators will be illuminated.
Page 5
Model no. 043-1320-0 | Contact us: 1-855-803-9313 1. A clean coffee maker is essential for making great-tasting coffee. Regularly clean the coffee maker as specified in the CLEANING AND MAINTENANCE section. Always use fresh, cold water in the coffee CAUTION: Be sure to unplug this appliance before cleaning. To protect against maker.
Need help?
Do you have a question about the 043-1320-0 and is the answer not in the manual?
Questions and answers
After I followed sets 1 to 5, I pressed the start button. The machine beeped 3 times and didn’t brew the coffee. Machine is a few years old so maybe we need a new coffee maker??
The Master Chef coffee maker model 043-1320-0 beeps three times and does not brew coffee if the top cover is not closed properly. This happens because the funnel is not assembled correctly, preventing the cover from closing. Ensure the funnel is positioned correctly and the top cover is fully closed before starting the brewing process.
This answer is automatically generated
@Mr. Anderson. I have the same problem. My coffeemaker is a few years old also and my lid is closed properly. Beeps 3 times and does not brew. The burner also remains cold.
Is the clock suppose to stay bright so you can at least see the time mine will not stay bright
The manual does not specify whether the clock display stays bright to show the time continuously.
This answer is automatically generated
What is the point of the clock if you have to be 2 inches away to see the time? Why does it not stay lit like other brands?
In throwing out the used grains, I dislodged the spring valve. How do I get the spring valve back in position?
Is the clock suppposeto stay lite