Related Manuals for Barracuda CloudGen Firewall
Summary of Contents for Barracuda CloudGen Firewall
- Page 1 Barracuda CloudGen Firewall Barracuda NG Firewall F600 Revision C https://campus.barracuda.com/doc/41116441/ F600 standard model .C10 F600 sub-model .C20 F600 sub-model .F10 Barracuda NG Firewall F600 Revision C 1 / 8...
- Page 2 F600 sub-model .F20 F600 sub-model .E20 The standard model of Barracuda's NG Firewall F600 (Rev. C) comes with twelve 10/100/1000 MBit RJ45 Ethernet ports and a single power supply. Other F600 model types (.C20, .F10 and .E20) provide different port combinations and options for dual power supply.
-
Page 3: Hardware Specifications
10 GbE Fibre SFP+ Hardware Specifications Opening your Barracuda Networks appliance or removing its warranty label unless instructed to do so by Barracuda Networks support will void your warranty and hardware support. Barracuda Barracuda NG Firewall F600 Revision C... - Page 4 The hardware specifications list was valid at the time this manual was published. The listed components are subject to change at any time, as Barracuda Networks may change hardware components due to technological progress. Therefore, the list may not reflect the current hardware configuration of the Barracuda Networks NG Firewall or NG Control Center appliance it...
-
Page 5: Operation
Installation was completed successfully, appliance is halted for Green Steady reboot or installation was not yet Barracuda NG Firewall is up and running. initialized far enough for LED control. An error has appeared preventing Barracuda NG Firewall from entering the Blinking Error during installation. - Page 6 Shutdown menu Enables you to shut down the appliance. Reboot menu Enables you to reboot the appliance. Menu to change the Configure the IP address for the management port. management IP address Barracuda NG Firewall F600 Revision C 6 / 8...
- Page 7 Once set, this flag can not be deleted through the menu. When Menu to boot into during the rebooted, the appliance will not start Barracuda OS, but ART next reboot instead. You may connect to the appliance by using the serial console or by SSH.
- Page 8 Barracuda Networks Inc. All specifications are subject to change without notice. Barracuda Networks Inc. assumes no responsibility for any inaccuracies in this document. Barracuda Networks Inc. reserves the right to change, modify, transfer, or otherwise revise this publication without notice.