Advertisement
Quick Links
EMA2 – an innovated successor
to the popular car alarm
Dear Customer,
thank you for purchasing the EMA2 alarm system – a car
alarm developed by FLAJZAR s.r.o.
The EMA2 is a miniature GSM car alarm designed to secure
almost any type of car without the need for installation and
it's also easily transported from a car to a car.
Car security has never been easier to install and more en-
joyable to use! Installation of the EMA2 car alarm is based
simply on inserting the alarm into the cigarette lighter
socket. With automatic activation and deactivation of the
protection with authorisation pendants, you don't have
to worry whether or not you have forgotten to turn the
protection on or off . The protection activates itself when
you leave the car and it deactivates itself when you arrive
to your car.
EN 1
Advertisement
Related Manuals for FLAJZAR EMA2
Summary of Contents for FLAJZAR EMA2
- Page 1 EMA2 – an innovated successor to the popular car alarm Dear Customer, thank you for purchasing the EMA2 alarm system – a car alarm developed by FLAJZAR s.r.o. The EMA2 is a miniature GSM car alarm designed to secure almost any type of car without the need for installation and it’s also easily transported from a car to a car.
- Page 2 Wireless shock detector Combined wireless detector Power cord extension The EMA2 doesn’t aim to replace expensive built-in alarms and satellite systems, but it is a very welcome op- tion that enhances the security of your vehicle – whether you are parking at a shopping centre, on city streets, you are possibly fi shing or at weekend cottage.
- Page 3 This means that the EMA2 is logged on to the mobile operator’s network and is ready for use. Teach the EMA2 your phone number: Briefl y press the button again, the green and blue lights should fl ash alternately - EMA2 is in learning mode.
- Page 4 Note: We recommend that you to turn off the voice mailbox on the SIM card of the EMA2 alarm as well as the welcome melody or other operator messages. This setting needs to be carried out on the mobile phone with the SIM card inserted from the EMA2 alarm.
- Page 5 Daily SMS limit is enabled with a limit of 50 outgoing SMS Intercept is switched on Integrated shock detector is on, medium sensitivity Activation and deactivation of the protection mode The EMA2 allows two ways of activating and deactivat- ing the protection: Automatic activation and deactivation with an au- thorisation pendant When you leave the car with the authorisation pen- dant, the EMA2 starts counting 60 seconds.
- Page 6 In this mode, the protection status is controlled by the user – with a free ringtone or SMS. When leaving the car, call the EMA2 or send an SMS with a command to activate protection. Before approaching the car, call the EMA2 or send an SMS with a command to deactivate the protection.
-
Page 7: Operating Conditions
The EMA2 switches to this mode in the following cases: Connection of 12V power or USB Alarm activation with an integrated or wireless sensor By pressing the button (if the EMA2 has been in Sleep or Off mode) Sleep: GSM turned off... - Page 8 EMA2 switches to Sleep mode after fi ve min- utes to save the backup battery’s power. Upon entering the car, an integrated or wireless sen- sor is triggered, the EMA2 switches from Sleep mode to ON mode and counts 20 seconds to catch the signal...
- Page 9 Page 1 of the program – Settings 19 20 1. File – allows you to load and save the EMA2 settings from a fi le and update the fi rmware from the fi le. 2. Settings – switches to the fi rst page of the confi gu- ration program with the EMA2 settings 3.
- Page 10 SMS in 24 hours 16. Microphone – enables/disables listening function 17. Integrated motion detector – setting the vibra- tion sensor inside the EMA2 On/Off - Enables/disables the integrated sensor. Sensitivity – setting the sensitiv- ity of the integrated sensor EN 10...
- Page 11 – displays the current GSM signal strength 20. Battery – displays the current status of the backup battery 21. EMA2 version – displays the Firmware and the EMA2 Hardware version 22. USB connection status – displays the current USB connection status 23.
- Page 12 Controlling and confi guration via SMS commands Controlling the EMA2 alarm via SMS commands is sim- ple. However, a few basic rules must be followed and it’s also necessary to keep the exact form of the SMS. The SMS command is composed of a numeric password (e.g.
- Page 13 EMA2 is turned on.) PENDANTS ON Unblocks authorisation pendants Note: Controlling SMS commands can also be used without a password if your phone number is saved in the EMA2. Confi guration SMS commands: ET’S GET STARTED Saves the SMS sender’s phone...
-
Page 14: Imei Number
Restore factory settings is to clear all user settings in- cluding password. Default password is “1234”. Restore is carried out via the SMS command: “password SETDEFAULT”. The EMA2 confi rms the restoring the factory settings via an SMS. EN 14... - Page 15 Send an SMS to the EMA2 phone number containing an IMEI number (without a password). The EMA2 confi rms the password has been reset by SMS. The password is now “1234”. Control by calling The protection status can be controlled free of charge by ringing.
- Page 16 Charging only: 5V DC from a USB port Subscription: 200 mA charging, 600 mA max. in GSM communication Operating temperature: -20 up +70°C Guarantee The manufacturer provides a guarantee of 24 months from the date of sale. The guarantee does not cover damage caused by improper connection and use contrary to this manual.
- Page 17 Notes on use The SIM card must have disabled PIN code and must be activated (it has made a call) The idle consumption of the device depends on the operating conditions (signal strength, mode, com- munication with the operator’s network, etc.) Outgoing calls and SMS from the device’s inserted SIM card are charged according to the selected op- erator’s service pricelist.
- Page 18 The device battery can be changed by the device manufacturer at the following address: FLAJZAR, s.r.o., Lidéřovice no. 151, 696 61 Vnorovy (Hodonín) Tel.:+420 776 586 866, www.fl ajzar.cz. The manufacturer shall secure their ecological disposal at their own expense. Incorrect disposal of used batter- ies and accumulators could damage the environment.
- Page 19 LEARN Button When pressed shortly, it sends the learn code for pair- ing with the EMA2 car alarm, it switches on the tag if it was turned off . When pressed for more than 6 seconds, the tag is turned off .
- Page 20 See the EMA2 car alarm instruc- tions for pairing procedure. Learn button Battery Replacement Loosen the three bottom screws at the sides of the box using a narrow crosshead screwdriver and open the up- per lid of the tag, remove the old battery and replace it with a new one.
- Page 21 Improper disposal of this type of waste may be subject to fi nes in accordance with national regulations. The device battery can be changed by the device manufacturer at the following address: FLAJZAR, s.r.o., Lidéřovice no. 151, 696 61 Vnorovy (Hodonín) Tel.:+420 776 586 866, www.fl ajzar.cz.
- Page 22 EN 22...
- Page 23 GPS Receiver E2-GPS It extends the EMA2 car alarm capabilities by accurate GPS localization. Refer to the EMA2 car alarm instructions for more infor- mation on using the GPS receiver. Installation and Location It is important for the correct function of the GPS re- ceiver to place it so that it has the best ‘view’...
- Page 24 < 10 m with a direct view of the sky Note: The GPS receiver E2GPS is only intended for connection and use with the EMA2 car alarm. Connecting it to another device may damage the GPS receiver or device. Recycling Information for users to dispose of electrical and elec- tronic equipment.
- Page 25 The device battery can be changed by the device manufacturer at the following address: FLAJZAR, s.r.o., Lidéřovice no. 151, 696 61 Vnorovy (Hodonín) Tel.:+420 776 586 866, www.fl ajzar.cz. The manufacturer shall secure their ecological disposal at their own expense. Incorrect disposal of used batter- ies and accumulators could damage the environment.
- Page 26 EN 26...
- Page 27 E2-KOMBI E2-OTR E2-PIR, E2-OTR and E2-KOMBI They are used for easy extension of the EMA2 car alarm by additional sensors to secure the luggage compart- ment or property near your car, such as a caravan. E2-PIR: Wireless detector responding to the motion of persons in the monitored area.
- Page 28 . The button is on the bot- tom of the box; use a paper clip to press it. See the EMA2 car alarm instructions for pairing proce- dure. Battery Replacement Loosen the two bottom screws at the corners of the...
- Page 29 Installation and Location E2-PIR and E2-KOMBI: The PIR motion detector operates on the principle of detecting bodies that have a diff erent temperature than their ambient temperature. Due to this fact, sev- eral general rules for the use of PIR detectors must be observed when selecting the location of their installa- tion, thus avoiding false alarms.
- Page 30 E2-OTR reports an alarm when shocks are detected E2-KOMBI reports an alarm only when the shocks and motion are detected in the area at the same time within one minute Specifi cations Dimensions: 68 × 36 × 16 mm Battery: CR2450, type lifetime 1 year Operating band: 868 MHz Operating temperature: -10 to +55°C...
- Page 31 FLAJZAR, s.r.o., Lidéřovice no. 151, 696 61 Vnorovy (Hodonín) Tel.:+420 776 586 866, www.fl ajzar.cz. The manufacturer shall secure their ecological disposal at their own expense. Incorrect disposal of used batter- ies and accumulators could damage the environment. Do not throw into a fi re, do not disassemble and do not short circuit.
- Page 32 EN 32...