Advertisement
1. Switching Three Blade or Two Blade Pedal Drive
Prop to the Proper Flex Drive E Prop.
The patented Flex Drive System makes switching from pedal to electric
power quick and easy. The Flex Drive E unit installs in the same coupling
slots used by the pedal drive unit.
We recommend upgrading to the 10" Pitch Pedal / 12V Prop (marked
with '10 x 10') for a 12V system or while pedaling and our 5" Pitch 24V
Prop (marked with '9 x 5') for a 24V system.
LENGTH
PROP MARKING
DESCRIPTION
MARKING
LOCATION
To replace the pedal drive prop:
(A) Remove the 2-blade or 3-blade pedal prop using an M3 allen key. Be
careful as three bladed prop will come apart as it is removed from the
unit.
(B)
Install the proper Flex Drive E prop to the hub. See chart
below.Guide the prop over the drive shaft, lining up the shear pin to
the mating slot in the hub. Insert screw and tighten, using a M3 allen
key to tighten snugly.
REMOVE 3-BLADE
OR 2-BLADE PEDAL
DRIVE PROP
(A)
THE RIGHT PROP FOR THE RIGHT VOLTAGE
FLEX DRIVE E
24V BATTERY
9.25"
9 X 5
ONE PROP ROTATION MOVES THE
BOAT FORWARD 5 INCHES
9.25"
9.25"
FLEX DRIVE E
12V BATTERY
ONE PROP ROTATION MOVES THE BOAT
BEHIND
BEHIND
BLADE
BLADE
INSTALL PROPER
FLEX DRIVE-E PROP
(B)
5
FLEX DRIVE
(PEDAL DRIVE)
10"
10 X 10
FORWARD 10 INCHES
BEHIND
BEHIND
BLADE
BLADE
10"
10"
Advertisement
