Advertisement
HOBART – PH 1300 731 615 | LAUNCESTON – PH 03 6343 1904 | DEVONPORT – PH 03 6423 2745
NB: It is important not to put the rubber boot on your finger until you actually go
to bed, but it is vital that the oximeter is worn and that the finger probe is on your
finger or you WILL have to do the study again.
Check and sleep
Step 9.
A. Check that you have correctly completed steps 1-
8:
a. 3 sticky electrodes on the forehead (one
more than video see pic right)
b. One sticky electrode for each eye
c. One sticky electrode behind each ear
d. One sticky electrode on each cheek.
e. One sticky electrode on the L and one
on the right chest.
f.
Two respiratory bands (1 for chest and 1
stomach)
g. Nasal cannula plugged into PRES port
h. Oximeter on wrist and finger.
B. You are ready for your Sleep Study;
Please
Do Not
press any buttons.
C. Relax and drift off to sleep.
D. The recording will start automatically.
NB: Regardless of what the device does or doesn't do,
DO NOT PUSH ANY BUTTONS. The device starts
automatically and finishes automatically. Do not pay any
attention to flashing lights, displayed messages or the
absence of these.
Step 10.
The following morning
A. One you have finished sleeping, carefully remove all parts of the
recording unit from your body.
B. Fill out the notes including medications.
C. Place ALL parts back into the box and return the entire system.
D. Don't remove the sticky dots from the leads but stick them onto the
plastic bag which contained the nasal cannula.
NB: Please return the device by 10.30am (no later).
E. Dispose of the nasal cannula, paper wrist strap, these instructions and
the effort belts.
In case a lead becomes dislodged from the device here is where they are located:
Back (with optional Limb lead in LM1)
www.healthdynamics.com.au
Fax: 03 4206 7880
Email: info@healthdynamics.com.au
Front
Advertisement
