Important Notices: When using an electrical appliance, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury, including the following: 1. Read all instructions before using. 2. Remove all packing material and carefully check your ice maker to ensure it is in good condition and that there is no damage to the ice maker or power cord and plug.
Page 3
appliance. 13. Do not use the appliance close by flames, hot plates or stoves. 14. Do not switch on the power button frequently (ensure 5min. interval at least) to avoid the damage of compressor. 15. Metal sheet or other electric objects are not allowed to be inserted into the appliance to avoid fire and short circuit.
Specifications: N.W: 11.5kg Model Number : 0 48-IM-C8208 Daily Ice Output 1 5kg / 24 hours Water Reservoir Capacity(up) 2 .5 L : : Ice Sizes s mall l arge Water Reservoir Capacity(down) 1 .0 L : 、 : Ice Storage Capacity 6 00g Voltage: 120V / 60 Hz :...
Page 5
11. Baseboard 14. Transparent Water Box Cover 12. Compressor 15. Control Panel 13. Power Cord Feature: Speedy & Regular ice-making Easy-use control design. Two ice sizes is optional. Transparent diamond ice Speedy (17min) and Regular (21 min) ice-making can make 24 pieces (a board) ice When working status, down water reservoir: 600ml In the status of 25...
Page 8
proper position, and cover it. Step 2. Connect the power, press the , and then the machine enters standby state. Step 3. Select the desired ice size, the default size of machine is large one. Step 4. Press key to start wok. Note: The water poured into water reservoir should be lower than the water reservoir’s MAX position.
Page 10
the machine. PROBLEM POSSIBLE CAUSE SUGGESTED SOLUTIONS The compressor works The voltage is lower Stop the Ice maker and do not abnormally with than restart until voltage a Buzzing recommended normal. Noise 1.Water of Water box is not much enough 1.
Page 11
1.No coolant The program of compressor making ice is Compressor Call the service centre. correct, but no damaged. ice come out motor damaged. 1.The ice is not access All indicators to ice board Unplug the power and plug twinkle 2. The movable detect again to restart the machine.
Need help?
Do you have a question about the 048-IM-C8208 and is the answer not in the manual?
Questions and answers