Pioneer CarisTouch CT15M Quick Start Manual

CarisTouch CT15M

Front View

Webcam (Optional)
Power Switch

Bottom View

See Page 2 for I/O info
Power Switch

Back View

VESA 100 threaded mounting holes
External Battery (Optional)
MF-PUB-007 (ver. A6)
Quick Start Guide
SSD / Hard Drive Bay
Built-in Speaker(Optional)
I/O info
Part Number: QXX-MXXXXX-XX
Sim Card Slot (Optional)
DC Power
COM Ports
2 1
Audio-out (Optional)
Mic-In (Optional)
I/O info
Part Number: QXX-YXXXXX-XX
Sim Card Slot (Optional)
DC Power
3 2
Audio-out (Optional)
Mic-In (Optional)

Setup Information:

Plug the power cord into the DC Power port before turning on the unit via the power switch.
For units with the optional battery installed:
1. Make sure the battery is fully charged before turning the unit on for the first time. Batteries can be
charged on a CT15M connected to a DC power source or via the mBAY Charging Station.
2. The CT15M will make a beeping noise once the external battery reaches low levels and will continue
to beep until the battery is replaced.
3. Replace the external battery with a fully charged battery as soon as possible for uninterrupted usage.

Optional Accessories

4HW-CBA03:
mBAY 4 battery charging station, white
USB 3.0
12V 24V
VGA LAN 2x USB 2.0
COM Ports
1 12V 24V
LAN 4X USB 3.0
HDMI
4HB-BAT01:
External Battery
(5200 mAh)
4HG-BAT02:
External Battery
(13400 mAh)
For product support:
US & Canada: support@pioneersolution.com,
or call 909-468-9757, option 2
Others: support@evensystems.com
Powered USB
Powered USB