Advertisement
EZ Prompter LCD Mount
What's Included:
If you purchased the EZ Prompter LCD Mount by itself, you will have:
a. (1) EZ Prompter LCD Mount
b. (4) Philips Head Screws
c. (1) Thumb Screw
d. (1) Allen Wrench
If you purchased the EZ Prompter LCD Mount with the LCD Monitor, you will have items A-D
plus:
e. (1) LCD Monitor with accessories (power
cord, etc.)
The EZ Prompter LCD Mount is one unit. It will arrive to you already assembled. This means that
there will be two plates of different lengths sitting on top of another. The EZ Prompter LCD Mount
will arrive in a collapsed position which is essential for protecting the mount when shipping.
Advertisement
Table of Contents
Summary of Contents for Barbertech Video Products EZ Prompter LCD Mount
- Page 1 (1) LCD Monitor with accessories (power cord, etc.) The EZ Prompter LCD Mount is one unit. It will arrive to you already assembled. This means that there will be two plates of different lengths sitting on top of another. The EZ Prompter LCD Mount...
- Page 2 EZ Prompter LCD Mount Instructions 1. Using the allen wrench provided (d), Loosen the allen screws that hold the mount together and raise the plates apart from each other. 2. Tighten one of the allen screw so your set- up will be stable.
- Page 3 6. Attach the EZ Prompter to you camera. 7. Be sure to support the weight of your camera while doing this step. Using the allen wrench (d) provided, Loosen the allen screws, and adjust the LCD Mount so you EZ Prompter has the appropriate height and distance from your monitor.
- Page 4 12. Put the LCD Mount set-up on your Tripod. 13. You’re now set and ready to go!. Thank you very much for using BarberTech Video Products! We appreciate your business and We look forward to working with you in the future.
Need help?
Do you have a question about the EZ Prompter LCD Mount and is the answer not in the manual?
Questions and answers