Advertisement
Advertisement
Table of Contents
Summary of Contents for Akuart SMARTDIVIDER
- Page 1 AKUART Installation Manual | SmartDivider 1 // INSTALLATION MANUAL SMARTDIVIDER...
- Page 2 AKUART Installation Manual | SmartDivider 2 // COMPONENTS (included) TOP WIRES (200 cm) SMARTDIVIDER FRAME - used to attach the top row of SmartDividers to the ceiling mounts - comes with four wire locks pre-installed, two in top, two in bottom...
- Page 3 D) Screw hooks with attached top wires into holes in ceiling. E) The distance between two rows of SmartDividers is 8 cm, which is the same distance as the distance from the side of the SmartDivider to the wire. F) Insert the ends of the top wires into the wire locks on the SmartDividers. Depress the wire lock to release the wire again.
- Page 4 B) The distance between each row of SmartDividers is 8 cm, the same as the distance between each column. C) To adjust the distance between two SmartDivider frames, either push the wire further into the wire lock, or depress the wire lock until it releases the wire.
Need help?
Do you have a question about the SMARTDIVIDER and is the answer not in the manual?
Questions and answers