Linux Source Code; Compile The Source Code On Linux System; Run On The Linux System; Command Line Parameters - SimTech SimCom SIM800 Series Application Note

2 Linux Source Code

SIMCom offers SIM800 upgrade Linux source code mtkdownload, as well as the binaries
compiled by Ubuntu 11.10 64 - bit system. Customer can run it directly under this system, in other
Linux systems, or client MCU system, users need to recompile the source code and run their own
code.

2.1 Compile the Source Code on Linux System

Run the following commands to complete the compiler directly.
gcc -o mtkdownload mtkdownload.c

2.2 Run on the Linux System

Run the following commands directly.
./mtkdownload <com> ROM_VIVA <format>

2.3 Command Line Parameters

<com>:/dev/ttyS0,/dev/ttyS1,/dev/ttyS2,/dev/ttyS3,/dev/ttyUSB0
Represent the:COM1,COM2,COM3,COM4 and the USB serial port
ROM_VIVA filename to upgrade
< format > parameter Y or N
Indicate whether or not format file system.
for example：
./mtkdownload /dev/ttyUSB0 ROM_VIVA Y
Indicate to upgrade SIM800 ROM_VIVA file, and format the file system by the USB serial
port.
SIM800 Series_Software Upgrade_Application Note_V1.02
Smart Machine Smart Decision
10
2014-06-30