Never place hands, feet or any for cleaning the equipment. other parte of the body near Any repairs must only be made rotative elements. by authorized Dormak agents. Withdraw lawn-mower’s electric plug from power supply before any maintenance or cleaning operations.
Page 6
2.2. General advices electricity immediately. Do not touch the electric cable until electricity is shutted off. Damaged 1. This device must not be operated by cables must be replaced and not repaired! persons with physical, mental ou sensitive disabilities, by children or by anyone who 4.
Page 7
2.4. cables 4. Always mow crossways to the slope, never All extension cords to be used must upwards or down-wards. meet the minimum sections listed on the following table: 5. Be particulary careful when changing direction, specially on slopes. Voltage cable MiniMuM length...
5. All the replacement parts to be applied on this machine must be Dormak origin, or have 16. Disconnect the equipment from the Dormak’s approval. power supply: 6.
Page 9
functioning 4.2.2. how to stop the lawn-mower 4.1. How to adjust cutting height 1. Release the “on/off” lever (Picture H). Cutting height adjustment is made by moving up or down-wards the height lever near the 4.3. how to know when the grass bag is full wheels (picture F).
Page 10
1. Start mowing on the area next to the from the air entrances, grass ejection gap power supply socket, so that the extension and grass bag; cable may extend over the lawn as you get far from the socket. 3. Clean the visible surfaces of the machine with a dry wiper.
- Is power on? Malfunctioning - Is the home switch on? - If the home switch keeps shutting off, adress to an authorized Dormak service. 1. Switch off the electricity; the grass 2. Clean every air entrances, grass ejection gap and underneath the;...
Need help?
Do you have a question about the CR43 and is the answer not in the manual?
Questions and answers