Advertisement
Alternately, the latest version of the firmware may be downloaded from the "Firmware Updates" section of the
"Support Center" located at http://www.pemicro.com.
10
Interface Libraries
P&E produces a set of processor-specific Interface Libraries which allows the user to directly control the USB BDM
MULTILINK from any Windows Development Environment which can interact with a DLL. The interface libraries
come with examples for controlling the Multilink interface from Microsoft Visual C as well as Borland Delphi.
Details of the libraries for the RS08, HCS08, HC(S)12, and ColdFire V1 may be found on our website,
www.pemicro.com, at the Interface Library Routine product page for the appropriate Freescale processor.
11
Other Compatible Software
In addition to support from Freescale Codewarrior and other third party software, the USB BDM Multilink is
supported by a variety of software from P&E, including flash programmers, debuggers, and test application
packages. Details can be found at www.pemicro.com.
12
Transition To Production Programming
The USB BDM MULTILINK is intended for development and is not designed to accomodate the demands of
production programming. However, P&E's Cyclone programmers are specifically engineered to withstand the
rigors of a production environment and will provide a seamless transition from the USB BDM MULTILINK. More
information is available at: http://www.pemicro.com/cyclone
P&E's Cyclone PRO
Technical Summary For USB-ML-12E Rev. C
Advertisement
