Advertisement
Quick Links
Smart
Life
SP-101-JP
Smart Plug
Quick Installation Guide
Include Smart Plug -2
03
Go to Devices page and
click "+" icon.
Press Include Device
01
IOT
For Home
The SP-101 Smart Plug switch
is a security enabled wireless
Smart Plug, based on Z-Wave
Plus technology. It can be
connected by AirLive Z-wave
Gateway or other Z-Wave.
Each SP-101 is designed to
act as a repeater. Repeaters
will re-transmit the RF signal
to ensure that the signal is
received by its intended
destination by routing the
signal around obstacles and
radio dead spots.
04
Press "START INCLUSION"
Start to include a device.
Introduction
Include Smart Plug -3
Include Smart Plug -1
02
Plug the device into the
outlet.
Plug will automatically be in
including mode if you
excluded device, Green light
slowly flashing for 30
seconds.
Include Smart Plug -4
05
When the device is being
included, APP will configure
the setting into gateway.
Advertisement
Summary of Contents for Air Live Smart Life SP-101-JP
- Page 1 Introduction Include Smart Plug -1 Smart Life For Home The SP-101 Smart Plug switch Plug the device into the is a security enabled wireless outlet. Smart Plug, based on Z-Wave Plug will automatically be in Plus technology. It can be including mode if you connected by AirLive Z-wave excluded device, Green light...
- Page 2 Choosing a Suitable Installation Smart Installation Smart Location Plug-1 Plug-2 1. Do not locate the Switch 1. Plug this On/Off Switch Plug the appliance's power facing direct sunlight, into a wall outlet near the into the plug. humid or dusty place. load to be controlled.