Advertisement
Quick Links
Installation of Full Size Paddles for
Thrustmaster Wheel Hubs
This guide will take you step by step through the installation
of your new full size paddles to fit on the GTE, TM28 and
599XX EVO add-on wheel rim hubs.
CAUTION: Be careful to avoid static build-up while handling
the electronics in your wheel. Ricmotech is not responsible
for any damage you may cause to your wheel.
Begin by removing the 2 screws accessible through the
openings in the paddles.
Remove the 3 or 6 screws securing the original wheel to the
Temporarily remove the D-Pad and grounding spring.
hub.
Remove the Quick-Release and unplug the internal cable.
Remove the 4 screws to open the back cover.
Starting with one side first, remove the 4 screws holding the
paddle springs in place.
Advertisement
Summary of Contents for Ricmotech RMT-TM-FGP
- Page 1 599XX EVO add-on wheel rim hubs. CAUTION: Be careful to avoid static build-up while handling the electronics in your wheel. Ricmotech is not responsible for any damage you may cause to your wheel. Remove the Quick-Release and unplug the internal cable.
- Page 2 Temporarily set aside the paddle springs. Then remove the 2 screws securing the paddles to the pivots. Mount the steering wheel or your Ricmotech wheel adapter to the front to secure the quick-release into place. Insert the pre-assembled paddle into the slot and secure to the original plastic pivot with the 2 original screws.
Need help?
Do you have a question about the RMT-TM-FGP and is the answer not in the manual?
Questions and answers