Advertisement
ICWUSA.com, Inc.
ICWUSA.com, Inc.
Behind-the-keyboard scanner bracket SCHO15X1902
ADJUST LOCATION OF BRACKET CLAMPS
• To adjust location of bracket clamps on bracket bar,
loosen set screws with 3/32" hex key, move bracket
clamps and retighten set screws.
set screws
ATTACH KEYBOARD TO DROP MOUNT
• Align mounting
holes on the
keyboard with
those on keyboard
drop mount. Insert
middle screw only
and loosely tighten
with provided 5/32"
hex key.
SCANNER BRACKET INSTALLATION
•
Bracket bar length: 15"
•
Scanner plates vary in size, shape and required fasteners
underside of
keyboard
ATTACH SCAN BRACKET TO KEYBOARD
• Align screw holes
in bracket clamps
with holes in
mounting plate.
Insert provided
10-24x1/2" fl athead
screws from above
the plate. Tighten
with 1/8" hex key.
If you have any questions, please call 1-800-558-4435
Underside of
keyboard
ATTACH BRACKET MOUNTING PLATE
• Attach bracket
mounting plate
using provided
1/4-20x1" fl athead
screws. Tighten all
three screws with
5/32" hex key.
SCANNER BRACKET INSTALLATION - 12/4/19
Advertisement
