Table of Contents
Advertisement
Quick Links
(please keep carefully this document
INDICATIONS PLACED ON THE NAMEPLATE FOUND ON THE APPLIANCE:
INDICATIONS PLACED ON THE NAMEPLATE FOUND ON THE APPLIANCE:
INDICATIONS PLACED ON THE NAMEPLATE FOUND ON THE APPLIANCE:
o Model : ......................................
: ......................................
o Serial N° : ................................
N° : ................................
o Purchase date: ..............................
: ..............................
IMPORTANT :
It is recommended to note the serial number
It is recommended to note the serial number
and to write it down here above. It will be
and to write it down here above. It will be
necessary for ordering spare parts.
necessary for ordering spare parts
Installation & user guide
Installation & user guide
lease keep carefully this document)
RANGE STELLA 3
RANGE
Réf notice
Réf notice : 07/15
1
Advertisement
Table of Contents
Related Manuals for Fondis STELLA 3 Series
Summary of Contents for Fondis STELLA 3 Series
- Page 1 Installation & user guide Installation & user guide (please keep carefully this document lease keep carefully this document) RANGE RANGE STELLA 3 INDICATIONS PLACED ON THE NAMEPLATE FOUND ON THE APPLIANCE: INDICATIONS PLACED ON THE NAMEPLATE FOUND ON THE APPLIANCE: INDICATIONS PLACED ON THE NAMEPLATE FOUND ON THE APPLIANCE: o Model : ………………………………..
-
Page 3: Table Of Contents
SUMMARY EXPLODED VIEW STELLA3 RANGE ......................5 LIST OF DEVICES STELLA3 RANGE……………………………………………………………………………………………………….6 DOOR EXPLODED VIEW STELLA3 RANGE ....................7 DOOR PART LIST STELLA3 RANGE……………………………………………………………………………………………………….8 DRAWINGS………………………………………………………………………………………………………………………………. 9 to 13 CE CONFORMITY CERTIFICATES ....................114 to 17 FIREPLACE DIMENSIONS……………………………………………………………………………………………………………………18 1 INSTALLATION GUIDE ......................... 19 1.1. - Page 4 2.3. FIREPLACE IGNITION ........................26 2.4. WOOD LOADING ......................... 26 2.5. RELOADING ..........................27 2.6. DRAFT SETTING ......................... 27 2.7. WOOD SELECTION ........................28 2.8. MAINTENANCE ........................... 28 2.8.1. GLASS ........................... 28 2.8.2. REFRACTORY ........................29 2.8.3.ASHES ........................... 29 2.8.4. PAINT ........................... 29 2.8.5.
-
Page 5: Exploded View Stella3 Range
EXPLODED VIEW STELLA3 RANGE... -
Page 6: List Of Devices Stella3 Range
LIST OF DEVICES STELLA3 RANGE DFH700 H1000 N° DESCRIPTION V350 H600 H700 BF523045 SIDE STONE BF523045 BF522045 BF521045 BF525045 BF526043 EARTH STONE BF523043 BF522043 BF521043 BF525043 BF526043.1 SIDE STONE BF526080 DISTRIBUTOR BF523080 BF522080 BF521080 BF525080 BF526044 BACK STONE BF523044 BF522044 BF521044 BF57284 1.10... -
Page 7: Door Exploded View Stella3 Range
DOOR EXPLODED VIEW STELLA 3 RANGE... -
Page 8: Door Part List Stella3 Range
DOOR PART LIST STELLA3 RANGE N° DESCRIPTION V350 H600 H700 DFH700 H1000 1.8.1 DOORT SKELETON BF523101 BF522101 BF521101 BF521101 BF526101 1.8.2 RIGHT SIDE BF523102 BF522102 BF521102 BF521102 BF526102 1.8.3 LEFT SIDE BF523103 BF522103 BF521103 BF521103 BF526103 1.8.8 LOCK BF521031 BF521031 BF521031 BF521031 BF521031... - Page 9 DRAWINGS STELLA3 H700...
- Page 10 STELLA3 H600...
- Page 11 STELLA3 V350...
- Page 12 STELLA3 DFH700...
-
Page 13: Drawings
STELLA3 H1000... -
Page 14: Ce Conformity Certificates
CE CONFORMITY CERTIFICATES... -
Page 18: Fireplace Dimensions
FIREPLACE DIMENSIONS Dimensions Width Height Depth Net weight STELLA3 H700 824 mm 1729 mm 581 mm 185 kg STELLA3 DF700 824 mm 1729 mm 583 mm 190 kg STELLA3H600 728 mm 1651 mm 511 mm 150 kg STELLA3V350 444 mm 1716 mm 507 mm 130 kg... -
Page 19: Installation Guide
1 INSTALLATION GUIDE 1.1. RESPONSABILITIES 1.1.1. INSTALLATOR'S RESPONSABILITIES The person or company that carries out the installation of the fireplace is responsible for this installation and takes also the responsibility for the existing parts (chimney, flue… They are hence expected to check the existing installation and to carry out the necessary modifications to comply with the current regulations. -
Page 20: Dimensions Of The Chimney Flue Duct
If the duct is not suitable, it’s necessary to Either carry out a casing following a procedure with technical notice in favour of this particular use, Install a duct lining, Or install a new duct adapted to this use. The tubing can go descend to the nozzle of the appliance if it’s the same diameter 1.2.3. -
Page 21: Installation & Minimum Dimensions Of The Chimney
If the ventilation inside the room where the appliance is installed is sufficient ( new house or controlled mechanical ventilation system ), an inlet of outside air must be added. In any case, refer to the current regulation. 1.4. INSTALLATION & MINIMUM DIMENSIONS OF THE CHIMNEY Chimney duct Ventilation outlet and inlet... -
Page 22: Positionning The Appliance
IMPORTANT! Before any use, unlock the handle in order to liberate the counter weights and the door. IMPORTANT! Before any use, unlock the handle in order to liberate the counter weights for the door unlocking. handle 1.4.2. POSITIONNING THE APPLIANCE 1.4.2.1 Dismounting and mounting of the refractory (vermiculite) ** In order to lighten the appliance and facilitate the handling, it's possible to remove the refactory from the fireplace. -
Page 23: Level Control
1.4.2.2 Level control To control the level of the appliance, use after placing the feet cylinders supplied with the appliance.. Verify the level of the appliance with a bubble level ATTENTION, THE AIR INLET HAS TO BE DONE BEFORE INSTALLING THE APPLIANCE. -
Page 24: The Floor
1.4.4. THE FLOOR The appliance will be mounted on floors with a suitable bearing capacity and, if an existing construction does not allow such an installation, appropriate methods ( for example a load distribution plate) must be implemented. 1.5. CHAMBER VENTILATION It’s compulsory that the chamber is ventilated using natural convection. -
Page 25: Wall Insulation
1.6. WALL INSULATION The insulation used must have a fire reaction A1 or at least M0 / A2s1, d0. This insulation is not necessary in the case where the temperature of inside walls of the decoration or of the hood does not exceed 85 ° C (isolated insert and flue pipe and ventilated decoration). -
Page 26: Using Guide
The outside surfaces of the appliance are hot while it operates for many hours after it stops, therefore beware no to touch them. Any modification made to the appliance will cancel the responsibility of Fondis in case of accidents. It is recommended that only original spare parts are used, provided by your reseller or Fondis directly. -
Page 27: Reloading
OUTSIDE THE STARTING AND RESUMING PERIODS, IT IS IMPERATIVE TO OPERATE NORMAL OR REDUCED REGIME. HIGH SUSTAINED REGIME WILL LEAD TO PREMATURE WEAR OF THE APPLIANCE AND CAN INCREASE THE RISK OF FIRE ACCIDENTS. THE DOOR MUST BE OPENED USING THE COLD HAND PROVIDED WITH THE APPLIANCE. BY OPENING SLOWLY, YOU WILL AVOID FUME BACKDRAFTS CAUSED BY THE DRAUGHT, AS WELL AS POTENTIAL EMBER 2.5. -
Page 28: Wood Selection
2.7. WOOD SELECTION The performance levels announced by the manufacturer are achieved in conditions defined by the current standard and using dry wood (beech, hornbeam,) The wood you used must be dry, i.e. its humidity rate must be lower than 20 %. In order to obtain combustible wood, it is therefore essential to use it at the earliest 18 months after felling and cutting, including 6 months of storage under ventilated shelter. -
Page 29: Refractory
The nature and the quality of the wood influence the volume of produced ashes 2.8.4. PAINT Paint touch ups can be made by the user with the FONDIS high temperature paint (minimum 500°C). -
Page 30: Sealing Gaskets
.It is not necessary to change the bricks because of the surface damages and cracks. Although the wearing of bricks is normal , they are covered by a two years Fondis warranty. 2.8.7. CHIMNEY SWEEPING... -
Page 31: Warranty
1641 and following of the French civil code. CONTRACTUAL WARRANTY During the period of the contractual guarantee, FONDIS shall replace all demonstrably defective parts after the return of the incriminated part to the distributor. The guarantee of the manufacturer gives the right to a free supply of the parts that are necessary to repair the appliance after agreement of the after-sales service. - Page 32 • Installation not compliant with our recommendations. CONDITIONS OF APPLICABILITY The contractual guarantee applies to all appliances that were installed and operated in accordance with the "Installation and operation instructions" and to the regulation in force. It is dependent on the presentation of the purchase invoice or a copy thereof.
-
Page 33: Annexes
4. ANNEXES 4.1. Operating diagnostic: DIAGNOSTIC REMEDIES DIFFICULT IGNITION CHECK THE DRAFT CHECK THE QUALITY OF THE WOOD CHECK THE AIR INLETS SMOKE EMISSION WHEN OPEN A DOOR OR A WINDOW TO CHECK WHETHER THE EXTERNAL OPENING THE DOOR AIR SUPPLI IS SUFFICIENT CHECK THE DRAFT OF THE FLUE PIPE ( IT MUST BE TIGHT AND NOT CLOGGED). -
Page 34: From Tree To Fire
Wood is a renewable low source of energy, synonym of satisfaction and comfortable living, very contemporary energy. If you have any further questions, please do not hesitate to contact your installer or to contact us: FONDIS Customer service : + 33 (3).89.37.75.00...
Need help?
Do you have a question about the STELLA 3 Series and is the answer not in the manual?
Questions and answers