Connecting To Serial Over Lan - Nvidia DGX A100 User Manual

Chapter 5 : Additional Features and Instructions
5.1.2

Connecting to Serial Over LAN

While dumping vmcore, the BMC screen console goes blank approximately 11 minutes
after the crash dump is started. To view the console output during the crash dump,
connect to serial over LAN as follows:
$ ipmitool -I lanplus -H <bmc-ip-address> -U <BMC-USERNAME> -P <BMC-
PASSWORD> sol activate
DGX A100 System User Guide DU-09821-001_v01 | 31