Whirlpool RB17OPXY Use And Care Manual page 23

Method 2-Using Start Time
and Stop Time:
1. Position the oven rack(s) properly and put
food in the oven.
2. Make sure the clock Is set to
the
correct
time of
day. (See
"Setting the clock" on
page 10.)
3. Push the Bake pad to enter the Bake mode.
Use the Temp pad(s) to set the desired
temperature. Push A to raise the temperature
or V to lower the temperature in 5'F incre-
ments. Use these pads until the desired
temperature shows in the small display.
After you have set the desired temperature,
the display will show the set temperature and
the time of day. BAKE will light up.
4. Push the Delay Start Time pad. The time of
day with the colon flashing will show in the
display and START TIME will light up.
5. Use the Hour and Minute pads to set the
desired start time. Push the "up" (A) or
"down" (V) pad(s) until the correct time shows
in the display.
This example shows a desired start time of
2
o'clock.
6. Push the Stop Time pad. The time of day with
the colon flashing will show in the display and
STOP TIME will light up.
23