Advertisement
Quick Links
www.johnsonhardware.com
PREPARE OPENING CAREFULLY: MAKE SURE CORNERS ARE SQUARE,
PREPARE LA ABERTURA CON CUIDADO: ASEGÚRESE QUE LAS ESQUINAS, ESTÉN EN ESCUADRA,
QUE LA CABECERA ESTE NIVELADA, Y QUE LAS JAMBAS ESTÉN RECTAS.
'
PREPAREZ L
OUVERTURE AVEC PRECAUTION: ASSUREZ VOUS QUE LES COINS SONT A ANGLE DROIT,
QUE LE LINTEAU EST A NIVEAU ET QUE LES MONTANTS SONT DROITS.
200
2020
2155
3/8"
(10mm)
2020
201
IN200SLD
L.E. JOHNSON PRODUCTS, INC. - 2100 STERLING AVE. - ELKHART, IN USA 46516 - (574) 293-5664
200SD SERIES
R
SLIDING DOOR HARDWARE
HEADER IS LEVEL AND JAMBS ARE STRAIGHT.
2 Door, Portes, Puertas:
2155
#30
3 Door, Portes, Puertas:
2155
#30
4 Door, Portes, Puertas:
2155
#30
Min. 3-1/8" (79mm)
Max. 3-7/8" (98mm)
1-3/8"
(35mm)
3/8"
(10mm)
------INSTRUCTION SHEET IS SUBJECT TO CHANGE------
2X Door width -1"
2X Ancho de la Puerta -25mm
2X Largeur de Porte -25mm
#30
2031
3X Door width -2"
3X Ancho de la Puerta -50mm
3X Largeur de Porte -50mm
2055
2155
#30
#30
2031
2031
4X Door width -2"
4X Ancho de la Puerta -50mm
4X Largeur de Porte -50mm
2055
2055
2155
#30
#30
2031
2031
3/8"
(10mm)
2020
201
É
2055
30 US3
1/4" (6.5mm)
Min. 3-1/8" (79mm)
Max. 3-7/8" (98mm)
1-3/4"
(45mm)
3/8"
(10mm)
í
á
201
Rev. 08/13
Advertisement
Summary of Contents for Johnson 200SD Series
- Page 1 Max. 3-7/8" (98mm) Max. 3-7/8" (98mm) 2020 2020 1-3/8" 1-3/4" (35mm) (45mm) 3/8" 3/8" (10mm) (10mm) IN200SLD L.E. JOHNSON PRODUCTS, INC. - 2100 STERLING AVE. - ELKHART, IN USA 46516 - (574) 293-5664 Rev. 08/13 ------INSTRUCTION SHEET IS SUBJECT TO CHANGE------...
- Page 2 MOUNT TRACK TO HEADER: Cut track to fit opening, insert 2020 Hangers and 2055 Stop (3 or 4 door openings only) into 2020 track and mount to header with 1-1/4" (32mm) pan head screws. 2020 COLOQUE EL RIEL EN LA CABECERA: Corte el riel para que quepa en la abertura, inserte los Colgadores 2020 y el Freno 2055 (sólo para aberturas de 3 o 4 puertas) en el riel e instalelos en la cabecera con tomillos de cabeza redonda de 32mm.
- Page 3 ATTACH DOOR GUIDE: Move both doors to one side of jamb. Place Door Guides 201 between doors and align doors with jamb. Attach door guides to floor with 1-1/4" (32mm) screw. Push doors to opposite jamb and put 1-1/4" (32mm) screw in other end of guides. COLOQUE LA GUIA DE LA PUERTA: Mueva las dos puertas hacia un lado de la jamba.
- Page 4 Para paneles de hasta 913mm X 2741mm Pour panneaux jusqu'à 1281mm X 2741mm Pour panneaux jusqu'à 913mm X 2741mm 2002 2002 IN200SLD L.E. JOHNSON PRODUCTS, INC. - 2100 STERLING AVE. - ELKHART, IN USA 46516 - (574) 293-5664 Rev. 08/13 ------INSTRUCTION SHEET IS SUBJECT TO CHANGE------...