Advertisement
Available languages
Available languages
2. Thread fixture wires through coverplate gasket (C)
(Fig. 4).
3. Hang one end of the support hook onto the
mounting bracket and hang the light fixture on the
other end of the support hook (Fig. 5).
4. Connect fixture black wire to house black wire,
fixture white wire to house white wire, and fixture
ground wire to house ground wire using the
attached quick connectors (Fig.6.
6
A
5. Attach fixture (A) to the mounting bracket (B) using
(2) #8 x 1-1/4 in. screws (F) provided. Be sure no
loose wires remain sticking out from underneath
the coverplate. Insert the decorative screw cover
caps (G) into the screw holes on the coverplate for a
finished appearance (Fig. 7).
6. Apply silicone caulk around the edges of the
coverplate and around the adjustment arm lock nut
to provide a watertight seal from rain and moisture.
7. Turn on power at main fuse /breaker box.
TROUBLESHOOTING
Problem
Cause / Solution
Light does not
No power to the fixture.
come ON.
• Check if circuit breaker tripped.
• Confirm wall switch is ON.
Fixture is sensing daylight.
• Cover light sensor. Unit will switch ON immediately.
TURN OFF POWER BEFORE CONTINUING
Wiring to the unit is loose.
• Confirm wiring is properly secured.
* If light still does not come on after checking wiring
connections, contact Customer Service.
Light cycles
Light sensor is sensing reflected light.
ON and OFF
• Relocate light fixture where it no longer cycles on and off.
continuously.
Light stays ON.
Light sensor is in a shaded area.
• Shine a flashlight into the light sensor. If the light turns off, the
fixture is mounted in an area that does not allow enough light to
enter the light sensor.
If light sensor is not in a shaded area, light sensor could be faulty.
• Contact Customer Service.
5-YEAR LIMITED WARRANTY
THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT NOT LIMITED TO, ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Eaton warrants to customers that, for a period of five years from the date of purchase, Eaton
products will be free from defects in materials and workmanship. The obligation of Eaton
under this warranty is expressly limited to the provision of replacement products. This
warranty is extended only to the original purchaser of the product. A purchaser's receipt or
other proof of date of original purchase acceptable to Eaton. This is required before warranty
performance shall be rendered.
This warranty does not apply to Eaton products that have been altered or repaired or that
have been subjected to neglect, abuse, misuse or accident (including shipping damages). This
warranty does not apply to products not manufactured by Eaton which have been supplied,
installed, and/or used in conjunction with Eaton products. Damage to the product caused by
replacement bulbs or corrosion or discoloration of brass components are not covered by this
warranty.
LIMITATION OF LIABILITY:
IN NO EVENT SHALL EATON BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUEN-
5
A
B
C
Junction
box
7
G
A
TIAL DAMAGES (REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, STRICT
LIABILITY, OR IN TORT INCLUDING NEGLIGENCE), NOR FOR LOST PROFITS; NOR SHALL THE
LIABILITY OF EATON FOR ANY CLAIMS OR DAMAGE ARISING OUT OF OR CONNECTED WITH
THESE TERMS OR THE MANUFACTURE, SALE, DELIVERY, USE, MAINTENANCE, REPAIR OR
E
MODIFICATION OF EATON PRODUCTS, OR SUPPLY OF ANY REPLACEMENT PARTS THEREFORE,
EXCEED THE PURCHASE PRICE OF EATON PRODUCTS GIVING RISE TO A CLAIM. NO LABOR
CHARGES WILL BE ACCEPTED TO REMOVE OR INSTALL FIXTURES.
To obtain warranty service, please contact Eaton at 1-800-334-6871, press option 2 for
Customer Service, or via e-mail ConsumerProducts@eaton.com and include the following
information:
• Name, address and telephone number
• Date and place of purchase
• Catalog and quantity purchase
• Detailed description of problem
All returned products must be accompanied by a Return Goods Authorization Number issued
by the Company and must be returned freight prepaid. Any product received without a Return
Goods Authorization Number from the Company will be refused.
Eaton is not responsible for merchandise damaged in transit. Repaired or replaced products
shall be subject to the terms of this warranty and are inspected when packed. Evident or
concealed damage that is made in transit should be reported at once to the carrier making the
delivery and a claim filed with them.
Reproductions of this document without prior written approval of Eaton are strictly prohibited.
For assistance, call 1-800-334-6871 or e-mail us at ConsumerProducts@eaton.com.
Printed in China
G
FRANÇAIS
ARTICLES NÉCESSAIRES
(à acheter séparément)
• Tournevis cruciforme
• Agent d'étanchéité à base de silicone clair à l'épreuve des intempéries
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ
Des précautions de base doivent être suivies lors de l'utilisation de ce produit, incluant :
• Respectez tous les avertissements, y compris les avertissements ci-dessous ET ceux
qui sont inscrits sur l'étiquette d'avertissement.
• Conservez ces instructions et ces avertissements.
• Pour utilisation à l'extérieur seulement.
• Homologué C-UL US pour utilisation à des endroits mouillés.
• Le démontage de l'appareil annule la garantie.
• Votre appareil d'éclairage est pré-câblé et pré-assemblé pour une installation facile.
AVERTISSEMENT
• Lisez et suivez ces instructions.
• Risque d'incendie/de choc électrique. Si vous n'êtes pas qualifié, consultez
un électricien.
• Coupez le courant au fusible ou au disjoncteur avant installation ou entretien.
PRÉCAUTION
• Raccorder l'appareil d'éclairage à une alimentation 120V, 60 Hz. Toute autre
connexion annule la garantie.)
• L'appareil d'éclairage doit être installé par un électricien ou une personne chevronnée
en câblage domestique. Le système électrique et la méthode de connexion électrique
de l'appareil d'éclairage doivent être conformes au Code national de l'électricité et aux
codes locaux du bâtiment.
• Ce dispositif est conforme à la section 15 des règlements de la FCC. Son
fonctionnement est assujetti aux deux conditions suivantes : 1) cet appareil ne
doit pas provoquer d'interférences nuisibles et 2) cet appareil doit accepter toutes
les interférences reçues, même celles qui pourraient provoquer un fonctionnement
indésirable.
AVERTISSEMENT : Les réglementations de la FCC mentionnent que toute
modification ou altération apportée à cet équipement n'étant pas expressément
approuvée par le fabricant peut annuler le droit de l'utilisateur à faire
fonctionner cet équipement.
CONSERVEZ CES INSTRUCTIONS
2
Advertisement
