Cleaning The Condenser - Blomberg TGU490RX0 User Manual

Maintenance and cleaning
C
If the direct water draining is used
as an option, there is no need to
empty the water tank.

6.4 Cleaning the condenser;

Hot and humid air in the condenser is
cooled with the cold air from the room. Thus,
the humid air circulating in your dryer is
condensed and then pumped into the tank.
C
Clean the condenser after every
30 drying cycles or once a month.
To clean the condenser:
1. If a drying process has been carried out,
open the door of the machine and wait until it
cools down.
2. Unlock the 2 condenser locks after
opening the kick plate.
3. Pull out the condenser.
Dryer / User Manual
4. Clean the condenser by applying
pressurized water with a shower armature
and wait until the water drains.
5. Place the condenser in its housing. Fasten
the 2 locks and make sure that they are
seated securely.
6. Close the kick plate cover.
EN / 27