Whirlpool RB1200XV Use & Care Manual page 7

Using the Oven Controls
Baking
1.
Position the rack(s) properly
before
turning on the oven.
To
change rack position,
lift rack at
front and pull out.
The rack(s) should be placed so the
top of the food will be centered in
the oven. Always leave at least 1% to
2 inches (4-5 cm) between the sides
of the pan and the oven walls and
other pans. For more information,
see the Cooking Guide.
2. Set the Oven Selector to BAKE. 3. Set the Oven Temperature Control
to the baking temperature you
want The Oven Signal Light will
come on. The oven is preheated
when the Oven Signal Light first
goes off.
4. Put food in the oven.
NOTE: Oven
5. When baking is done, turn
both
racks, walls and door will be hot.
the Oven Selector and Oven
During baking, the elements will
Temperature Control to OFF
turn on and off to keep the oven
temperature at the setting. The
Oven Signal Light will turn on and
off with the elements.
The top element helps heat
during baking, but does not
turn red.
7