Pix-link LV-AC09 Quick Installation Manual

Quick Installation Guide
Wireless-AC Dual Band
1200Mbps Repeater/AP
Applicable Model:LV-AC09
Quick setup using a web browser
Power on
Plug the AC Repeater into an electrical
outlet near your router. When the router
boot completed, the Signal LED all on.
3

Configure the AC Repeater

1. Open a web-browser and type
will appear. Select the language for the installation, and then enter admin for the Password, Then click the
Submit button or press the Enter key to log in.
Language - Select the Language from the drop-down list. The default setting is
Password - Enter the password for Login. The default password is
2. After successful log in, you can click the Wizard to quickly configure your router. Select the Operation Mode
you need and click Next go on configuring.
•

Wireless Repeater Mode

Extand wireless signal comprehensively:This router can connect to uplink wireless router by wireless connection,user terminal can connect to this router by wired or wireless connection.

Connect to the AC Repeater

For Windows Users
Wireless-AC_2G
Wireless-AC_5G
Disconnect your Ethernet (wired) connection from your
computer. Click the Wi-Fi icon on the taskbar and connect
to the Repeater's network (e.g.
http://myrepeater.net in the address field. After a moment, a login window
admin

LED Explanation

Signal
(Repeater Mode)
The AC MiNi Router is connected to the router or AP, but is too far away from the router
or AP.
The AC MiNi Router is connected to the router or AP, and is in a good location.
The AC MiNi Router is connected to the router or AP, but is too far near from the router
or AP.

Button Explanation

WPS Button: If your host router supports WPS function, you can press the WPS button and
then press the WPS button of the AC Repeater to establish a secure connection between the
host router and the AC Repeater.
Reset Button: This button is used to restore the AC Repeater 's factor y default settings.
LAN/WAN Port: One 10/100/1000Mbps RJ45 Ethernet port.
•Repeater mode, it's used to add wireless connectivity to an Ethernet-enabled device such
as Internet TV,DVR, Gaming console and so on.Please note that this port is not allowed to
be connected with router.
•Access Point mode, it's used for connecting to front router or Internet.
For Mac OS X Users
Wireless-AC_2G
Wireless-AC_5G
Disconnect the Ethernet (wired) connection from your computer
(if any). Click the Wi-Fi icon in the top right corner of the screen,
Wireless-AC_2G/5G ). and connect to the Repeater's network (e.g.
English .
.
If Wireless Repeater Mode is selected,The Wireless Repeater(WDS) page will appear as shown below.
Select the SSID of the target network and insert Repeater SSID and the key of your network . the default Repeater
SSID is set to be xxxx_2G_Ext / xxxx_5G_Ext
Apply to complete setup.
Note: The Security Key is the same as your Wireless Router.
For Wired
Disable the Wi-Fi on your computer.
Connect your computer to the Repeater
Wireless-AC_2G/5G ). via an Ethernet cable.
http://myrepeater.net
Language English
Password
Submit
(xxxx indicates The Main Router's wireless network name). Then click