Subscribe to Our Youtube Channel
Summary of Contents for JR Home RetractAway
- Page 1 InstallatIon InstructIons & Warranty Tools Required Optional Tools For customer service, parts Watch our helpful or warranty issues: installation call 1-800-561-5550 video for more tips!
- Page 2 Keep bugs out while maintaining the beauty of your home!
- Page 3 single dOOR insTallaTiOn Hardware Required to install Part # description drill Bit Mounting Housing Plate end Cap screw Mounting Plate screw screw Bit sill Track screw Parts Required to install Part # description Track endcaps screw Caps drill Jig sill track Top track Top Track gasket Mounting Plate...
-
Page 4: Before Installation
BeFORe insTallaTiOn Determine the style of door you have left Inswing Door right Inswing Door outsIDe outsIDe left outswing Door right outswing Door outsIDe outsIDe Page 4 | 1-800-561-5550... -
Page 5: Installation
PRePaRing TOP & BOTTOM sill insTallaTiOn Watch our helpful installation video for more tips! a. start by measuring the widest part of your door opening. - record your measurement Note: Minor adjustments may need to be done after cutting as not all door openings are standard size. B. - Page 6 PRePaRing TOP & BOTTOM sill insTallaTiOn C. Cut sill Track to length : Measure sill track with previous measurement of your door opening. Place the sill track #18 on the saw horse. d. Insert the track end-cap #2 to the top track#19. line up top track with sill track.
-
Page 7: Gasket Installation
gaskeT insTallaTiOn #23/ e. Insert the top track gasket #20 into the top track #19 and cut off the excess using an exacto knife. F. Insert the mounting plate gasket #22 into the mounting plate #13. Note: During installation the gasket may become stretched be sure to allow enough time before cutting. - Page 8 BOTTOM sill insTallaTiOn Up to 5 #13B H. Position the Mounting Plate : Place the bottom sill track on the door opening and make sure it is positioned straight. Insert the mounting plate endcap #13B into the sill track and PVc opening. i.
- Page 9 MOUnTing PlaTe insTallaTiOn a. Fastening the Mounting Plate : use a square and make sure the bottom sill track and the mounting plate are completely perpendicular. using a pencil, mark one hole at the top and bottom of the mounting plate. Note: There are 3 holes provided at the top and the bottom, however only choose one of the holes that best fits your installation to provide a...
- Page 10 aTTaCHing THe sCReen asseMBly a. Positioning the Mounting Plate : For right hand mount hold the main screen assembly handlebar #17 in your left hand and the housing #15 in your right hand. Note: This will be opposite for a left hand mounted system.
- Page 11 TOP TRaCk insTallaTiOn a. Positioning the Top Track : take the pre-cut top track and insert into the mounting plate endcap #13B. B. engage the slide Control : slide the handlebar #17 all the way to the opposite end and engage the slidecontrol mechanism.
- Page 12 4. What happens if my screen mesh gets damaged? a. If the damage is on the handlebar side you can reverse the screen mesh by removing it, rotating it and re-installing it. see replacement mesh installation instructions at www.retractaway.com. 5. How do i activate the slideControl Feature? slide the handlebar all the way across to the track end-cap.
- Page 13 FaQ’s 6. How do i de-activate the slideControl Feature? to de-activate the slidecontrol, slide the handlebar away from the track end-caps. Insert a small screwdriver into the groove at the far end of the top and bottom track end-caps and push up/down to release the string anchors.
-
Page 14: Troubleshooting
TROUBlesHOOTing 1. When opening the screen, the handlebar retracts unevenly or the screen doesn’t stay closed. a. check if the handlebar gasket is rubbing on the top door trim. If so, cut the gasket to avoid rubbing. b. check if there is debris in the bottom track. c. -
Page 15: Warranty
Light bulbs and fuses are not covered under this warranty. If you have any questions regarding the warranty or service, please call our toll free number: 1-800-561-5550. Customer Service JR Home Products Unit 306 - 19100 Airport Way, Pitt Meadows, BC V3Y 0E2 Toll Free: 1-800-561-5550 You MUST register your product to receive warranty service.
Need help?
Do you have a question about the RetractAway and is the answer not in the manual?
Questions and answers