Page 1
– EC Declaration of Conformity – Safety instructions – Guarantee terms The operator must read and understand these instructions before operating the machine! MAASELÄN KONE OY Valimotie 1, FI-85800 Haapajärvi Tel. +358 (0)8 772 7300 info@hakkipilke.fi www.hakkipilke.fi HakkiFeed 422 rev. A Translated Version 1-2019...
Assembly instructions and spare parts diagrams ..............10 9.1. Parts list for the assembly ........................10 9.2. Assembly phases ............................ 11 10. Guarantee terms ........................18 11. Declaration of incorporation for partly completed machinery ..........19 HakkiFeed 422 rev. A Translated Version 1-2019...
1.2. Purpose of use The HakkiFeed 422 log rack is intended for moving pruned wood or logs onto a Hakki Pilke firewood processor. The firewood processor must not be used to process any treated wood, such as is found in construction waste.
The machine may not be operated unless the operator has familiarised themselves with this instruction manual. The machine is only intended for transferring logs to the Hakki Pilke firewood processor. The operator is not permitted to modify the structure or operation of the machine or remove protective equipment.
5 / 19 2.4. Main components of the machine The HakkiFeed 422 log rack is an accessory for the Hakki Pilke firewood processor. It is controlled hydraulically with the operating levers of the Hakki Pilke firewood processor’s control unit. A. In-feed conveyor B.
6 / 19 3.1.2. Connecting the hydraulics Use the operator’s manual of the relevant Hakki Pilke firewood processor for the connections! Use of the rack requires two separate control valves: Example Figure 3. In-feed conveyor A (Figure 1) Connected in series to the Hakki Pilke firewood processor’s in-feed...
3. Incorrect or insufficient valve pressure The feeder is not moving 1. Quick coupling fault or loose 1. Repair connection coupling 2. Disconnect from 2. Log stuck power source and remove blockage HakkiFeed 422 rev. A Translated Version 1-2019...
11 / 19 9.2. Assembly phases Phase 1: Assemble in accordance with Figure 7 and leave the screws loose. Figure 7 HakkiFeed 422 rev. A Translated Version 1-2019...
Page 12
12 / 19 Phase 2: Spread the front section. Install feeder 9 first, followed by support pipe 15. Leave the screws loose. Figure 8 HakkiFeed 422 rev. A Translated Version 1-2019...
Page 13
13 / 19 Phase 3: Install support 17 first, leave the screws loose. Then install intermediate support 15, leave the screws loose. Figure 9 HakkiFeed 422 rev. A Translated Version 1-2019...
Page 14
Phase 4: First install the No 30 diagonal supports. Fasten the screws to the lower ends and leave them loose. Then install middle pipe 14 and its screws. Leave the screws loose. Figure 10 HakkiFeed 422 rev. A Translated Version 1-2019...
Page 15
Phase 6: Install roller 13; bearing 12 on the end. Leave the screws loose. Then push hydraulic motor 11 into place. Tighten the hydraulic motor screws first, followed by the bearing screws. Figure 12 HakkiFeed 422 rev. A Translated Version 1-2019...
Page 16
Install the No 33 cylinder hoses. (Lower marked red, upper black) Figure 13 Install the USIT seals 31, nipples 32 and hydraulic hoses 33 (shorter hose, red) 34 (longer hose, black) and 35 (intermediate hose) in the hydraulic motors. Figure 14 HakkiFeed 422 rev. A Translated Version 1-2019...
Page 17
17 / 19 Phase 8: Install the No 4 extensions and their screws. Tighten the screws. Finish by inspecting the assembly! Figure 15 HakkiFeed 422 rev. A Translated Version 1-2019...
This guarantee certificate indicates our responsibilities and obligations in full and excludes all other responsibilities. HakkiFeed 422 rev. A Translated Version 1-2019...
Address: Valimotie 1, FI-85800 Haapajärvi The aforementioned person assures that HakkiFeed 422 log rack (Hakki Pilke firewood processor accessory) Serial number: ………………………… is compliant with the applicable regulations of the Machinery Directive (2006/42/EC). This partly completed device may only be connected to a compatible Hakki Pilke firewood processor.