NETGEAR FVS318N Quick Start Manual page 2

Reset the configuration to default settings, prosafe wireless-n 8-port gigabit vpn firewall

Hide thumbs Also See for FVS318N:

ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

b. Click the Default button.

The wireless VPN firewall reboots. During the reboot process, the Settings Backup and

Firmware Upgrade screen might remain visible, or a status message with a counter might

show the number of seconds left until the reboot process is complete. The reboot process

takes about 165 seconds. (If you can see the unit: The reboot process is complete when

the Test LED on the front panel goes off.)

Note:

After rebooting with factory default settings, the wireless VPN

firewall's password is password, and the LAN IPv4 address is

192.168.1.1. For more information about the default settings, see

Appendix A, "Default Settings and Technical Specifications," in the

Reference Manual.

Reset the Configuration to Default Settings