PBteen Shimmer Assembly Instructions

Shimmer Table Lamp
Assembly Instructions
Important Safety Instructions:
•
These instructions are provided for your safety. It is very important that they are read carefully and completely before
beginning the assembly and installation of this lighting fixture.
•
This portable luminaire has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless plug can be fully
inserted. Do not alter the plug. Do not attempt to defeat this safety feature.
•
This fixture has been rated for up to one (1) 60-watt maximum TYPE A standard incandescent light bulb (not
included) or one (1) 13-watt compact fluorescent light bulb
risk of fire, do not exceed the recommended lamp wattage.
•
This lamp is meant for indoor use.
•
Save these instructions.
WARNING:
•
To reduce the risk of fire, electrical shock or personal injury, always turn off and unplug the light fixture and
allow it to cool prior to replacing the light bulb.
•
Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
•
Keep flammable materials away from lit bulb.
Pre-assembly:

Remove all parts and hardware from box along with any plastic protective packaging.

Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
(included for California customers
US/CN
only). To avoid the
Page 1 of 2