Electrolux CI1001 User Manual page 11

8.1 What to do if...
Problem
The appliance does not
operate.
The Alarm light flashes
Power indicator light is
flashing.
The compressor operates
continually.
There is too much frost
and ice.
The compressor does not
start immediately after
pressing the "FastFreeze",
or after changing the tem‐
perature.
Possible cause
The appliance is switch‐
ed off.
The mains plug is not
connected to the mains
socket correctly.
There is no voltage in the
mains socket.
The temperature in the
freezer is too high.
An error has occurred in
measuring the tempera‐
ture.
The appliance is not
working properly.
Temperature is set incor‐
rectly.
Many food products were
put in at the same time.
The room temperature is
too high.
Food products placed in
the appliance were too
warm.
The door is not closed
correctly.
The "FastFreeze func‐
tion" is switched on.
The door is not closed
correctly or the gasket is
deformed/dirty.
Temperature is set incor‐
rectly.
This is normal, no error
has occurred.
ENGLISH
Solution
Switch on the appliance.
Connect the mains plug to
the mains socket correctly.
Connect a different electrical
appliance to the mains sock‐
et. Contact a qualified elec‐
trician.
Refer to 'High temperature
alarm.
Contact a qualified electri‐
cian or contact the nearest
Authorised Service Centre.
Contact a qualified electri‐
cian or contact the nearest
Authorised Service Centre.
Refer to "Operation".
Wait few hours and then
check the temperature
again.
Refer to climate class chart
on the rating plate.
Allow food products to cool
to room temperature before
storing.
Refer to "Closing the door".
Refer to "FastFreeze func‐
tion".
Refer to "Closing the door".
Refer to "Operation" .
The compressor starts after
a period of time.
11