Advertisement
English
Installation Instructions - For Service Persons Only
Model No: ELEGANT_TX
Elegant Wall Mount Transmitter
Technical Specifications:
Models:
Encryption type:
Transmission frequency:
Transmission method:
Transmission range:
Voltage range:
Battery type:
Sleep mode current consumption:
Current consumption on TX:
Operating Temperature:
Dimension (lxbxh)
Gross weight
Release date:
Features:
Code-Hopping Encryption
Elegant modern design
3V Long Life Lithium battery
Frequency stability controlled +/- 75KHz
Order Codes:
1 Ch Wall mount Transmitter (403MHz)
1 Ch Wall mount Transmitter (433MHz)
3V Lithium Battery CR2032
For more info visit our web site: www.sherlotronics.com
ELEGANT_TX
Code hopping
403MHz / 433MHz
OOk
150m (Open air) 40m (indoors)
2.0V to 3.6 VDC
CR2032 Lithium
< = 1uA
< = 20mA
-7°C to 49°C
60 x 60 x 25mm
55g
July 2018
Approvals:
This product is approved for use in Residential, commercial and Light Industrial
Environment and Complies with the essential protection requirements of the R&TTE
Directive 1999/EC on the approximation of the laws of the Member states relating to
electromagnetic compatibility and radio spectrum.
Certifications:
ETSI EN300 220-V2.4.1
ETSI EN301-489-3 V1.4.1
ETSI EN301-489-1 V1.9.2
IEC 60950-1:2005 + A1:200
ICASA TA-2018/1011
ELEGANT_TX
ELEGANT_TX_433
CR2032
III
Advertisement
Table of Contents
Summary of Contents for Sherlo Tronics ELEGANT_TX
- Page 1 English Installation Instructions - For Service Persons Only Model No: ELEGANT_TX Elegant Wall Mount Transmitter Technical Specifications: Models: ELEGANT_TX Encryption type: Code hopping Transmission frequency: 403MHz / 433MHz Transmission method: Transmission range: 150m (Open air) 40m (indoors) Voltage range: 2.0V to 3.6 VDC...
- Page 2 Replacing the Batteries 1. Unscrew the base plate 2. Remove the battery carefully pushing it out the battery holder towards the middle of the PCB 3. Install a new battery Positive (+) facing upwards. 4. Test the unit is operating before closing the housing the units LED light should come on when pressed CAUTION: RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE.
Need help?
Do you have a question about the ELEGANT_TX and is the answer not in the manual?
Questions and answers