Network Configuration - Royal Clima OSK102 Owner's Manual

6

NETWORK CONFIGURATION

Caution:
It is necessary to forget any other around network and
make sure the Android or IOS device just connect to
the WIFI network you want to configure.
Make sure the Android or IOS device WIFI function
works well and can be connected back to your original
WIFI network automatically.
Kindly reminder:
When AC enters into AP mode, the air-conditioning
remote controller can't control it. It is necessary to
finish network configuration or power the AC again
in order to control it. Alternatively, you need to wait
8 minutes to let the AC quit AP mode automatically.
Using Android device to do network configuration
Make sure your mobile device has already been
1
connected to the wifi network which you want to use.
Also, you need to forget other irrelative wifi network in
case it influences your cofiguration process.
Disconnect the power supply of AC.
2
Connect the power supply of AC, and continuously
3
press the digital display button or do not disturb button
seven times in 3 minutes.
When the AC displays AP , it means that the AC WIFI
4
has already entered into AP Mode.
Some type of AC do not need the
mode
'
'
'
'
'
'
'
'
5
step to be in AP
2